Cactus Industrial PMMA-Based Waterproofing Coating
Cactus Industrial PMMA-Based Waterproofing Coating is a solvent-free, rapid-curing and highly flexible liquid-applied membrane system. It delivers durable emergency surface repair and long life cycle waterproofing and corrosion protection. The waterproofing system is applied together with a tough fleece reinforcement to increase membrane strength. It is a solvent-free, 2-component, fast curing and highly flexible methacrylate waterproofing resin system.
Properties
- Physical Form
- Liquid
Product families
- Protective Coatings
Other characteristics
- Features
Corrosion Resistant, Durable, Excellent Substrate Adhesion, Fast Curing, Good Gap Filling Capabilities, High Reactivity, Highly Flexible, Low Temperature Resistant, UV Resistant, Water Resistant
- Product Type
2K (2 component) Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Solventless & High Solids Coating
- Application Area
- HVAC Ducts
- Markets
- Building & Construction
- Paints & Coatings
- Pot Life
At +20°C 100g, 2 % w/w PMMA Catalyst; Approx. 15 minutes.; Applies only to two component products and refers to the time the mixture remains usable.
- PACKAGING
- 10kg container.
- Key Benefits
Fast cure properties ensure the surface will be quickly watertight and Hard Dry after 60 minutes at 20°C and PMMA Catalyst dosage of 2% w/w..; Suitable for use on flat and pitched roof systems, and as a waterproofing roof membrane.; Liquid application allows easy, effective waterproofing of large and small surface areas with the most complicated details and penetrations securely incorporated.; Highly flexible and crack-bridging even at extreme sub-zero temperatures.; Can be applied to almost all substrates, including variable substrates when combined with appropriate primers.; Excellent UV and weather resistance.; Solvent-free.; Excellent resistance to ponded water.; Can be applied in temperatures as low as 0°C up to 30°C.
- Technology
- Ready-to-Use Products
- Safety Advice
Avoid skin and eye contact i.e. wear gloves, goggles, etc.; Ensure good ventilation, mechanical if necessary.; Store and use away from heat and flame.; Do not eat or smoke in the vicinity of work.; Wash hands before eating.
- Application Areas
- Flat and Pitched Roof Areas
- Metal Clad Profile Roofing Areas
- Gutter Waterproofing
- Balcony Waterproofing
- Deck and Flooring Waterproofing
- Glass/Glazing Waterproofing
- Car Parking
- Vents and pipes
- Equipment Cleaning
If work is interrupted or when it is completed, clean the tools thoroughly with cleaning agent within the pot life of the material.; This can be done with a brush.; Do not use the tools again until the cleaning agent has evaporated fully.; Simply immersing the tools in the cleaning agent will not prevent the material from hardening.
- Practical Coverage
Practical coverage can vary considerably depending on method of application, surface roughness, weather conditions and complexity of the structure.
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume | 100.0 | % | — |
| Typical Thickness (Depending on System) | 1000.0 | microns per coat | — |
| PMMA Catalyst by Weight | 2 - 6 | % | — |
| Viscosity (20°C) | 2000 - 3000 | mPa·s | DIN 53 015 |
| Viscosity (20°C, Thix) | Pasty | — | — |
| Density (D₄²⁰) | 1.13 | g/cm³ | DIN 51 757 |
| Flash Point | 10.0 | °C | DIN 51 755 |
| Processing Temperature (Substrate) | 0 - 30 | °C | — |
| Adhesive Pull Strength Hardened State | min. 2 | N/mm² | EN ISO 527 |
| Tensile Stress (Break, Hardened State) | 3.3 | N/mm² | — |
| Crack Bridging Hardened State | 1.55 | mm | EN ISO 527 |
| Elongation at Break Hardened State | 157.0 | % | EN ISO 527 |
