Cactus Industrial Bioclean Antifoul Coating - Bioclean Eco
Cactus Industrial Bioclean Antifoul Coating - Bioclean Eco is a silicone-based foul-release coating. It is specially designed for high fouling areas where the water flow is minimal. It is a special synthetic resin foul-release coating.
Product families
Applications
- Marine Coatings
- Marine
Product Families
- Protective Coatings
Other characteristics
- Features
Anti-Fouling, Chemical Resistant, High Solids Content, Low VOC, Service Life Extension
- Product Type
- Solventless & High Solids Coating
- Application Area
- Tunnels
- Application Method
- Brush, Roller, Spray
- Markets
- Automotive & Transportation
- PACKAGING
- One Pack Product.
- Advantages
- Biocide free.
- High volume solid, low V.O.C.
- Long service life.
- Effective from water flow of 3m/s.
- Compliance
IMO Anti-fouling Systems Convention compliant AFS/CONF/26.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Biocides-free
- Environmentally Friendly
- Heavy Metal-free
- Low VOC
- Overcoatability
- 5°C
- 10°C
- 20°C
- 30°C
- Recommended Use
In cooling water facilities of electrical power stations, intake tunnels of desalination plants or other structures which are mainly based underwater.
- Application Data
- Thinner
- Silicon Thinner BA
- Application Data
- Airless spray, brush, roller
- Application Methods
- Brush
- Roller
- Spray
- Surface Preparation
New Application:; Remove all contamination such as fouling, dirt, grease, oil, etc. prior to paint application.; This can be done by ultra HP-washing 250bar/350psi or blasting garnet, sand or grit.; Re-Coat:; Remove slime and other types of fouling by HP washing. Pressure to be used 100 - 120 bar.
- Minimum Safety Precautions
Observe the precautionary notices displayed on the container.; Provide adequate ventilation.; Avoid skin contact and inhalation of spray mist.; If the product comes into contact with the skin, wash thoroughly with luke warm water and soap or suitable cleaner.; If the eyes are contaminated, irrigate with water and seek medical advice immediately.; Since the product contains flammable materials, keep away from sparks and open flames.; No smoking should be permitted in the area.
- Ready to Use Product Features
- Anti-Fouling
- Chemical Resistant
- High Solids Content
- Low VOC
- Service Life Extension
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point | 56.0 | °C |
| Solids by Volume (Mix) | 92 - 96 | % |
| VOC (Theoretical) | 51.0 | g/l |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Maximum Humidity | 85.0 | % R.H. |
| Paint Output Pressure | 17.7 - 20.6 | MPa |
| Thinning by Volume | 0 - 1 | % |
| Film Thickness Wet | min. 160 | µm |
| Film Thickness Dry | min. 150 | µm |
| Spreading Rate (Theoretical) | 6.3 | m²/l |
