To catalogue
ARC® S2
ARC® S2 is 100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion.
Product families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Brand
- ARC
- Features
Abrasion Resistant, Corrosion Resistant, Excellent Flow Properties, Good Erosion Resistance, High Gloss
- Product Type
- Solventless & High Solids Coating
- Application Area
- Pipes, Tanks, Vacuum Pumps, Valves
- Pipes
- Tanks
- Vacuum Pumps
- Valves
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Metal, Steel
- Markets
- Building & Construction
- Paints & Coatings
- Coverage
- Nominal based on DFT 375 μm 15 mil.
- Typically applied as 2-Coat System.
- 1125 ml cartridge covers 3.00 m2 32.30 ft2
- 1.5 liter kit covers 4.00m2 43 ft2
- 5 liter kit covers 13.33 m2 143.52 ft2
- 16 liter kit covers 42.70 m2 459.30 ft2
- PACKAGING
1125 ml; 1.5 liter kit; 5 liter kit; 16 liter kit; Each kit includes mixing and application instructions.; 1.5 and 5 liter kits includes tools.
- Shelf LIfe
2 years.; Unopened containers.; Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.
- Designed to
Protect against corrosion and erosion.; Provide improved material flow properties.; Apply by brush, roller, airless or plural component spraying.
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Application Areas
- Tank lining
- Structural steel
- Pipe ID & OD
- Fans & housings
- Condensers
- Heat exchangers
- Hoppers
- Absorber modules
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cured Density | 99.0 | lb/cu.ft. | — |
| Compressive Strength | 12950.0 | psi | ASTM D 695 |
| Flexural Strength | 7400.0 | psi | ASTM D 790 |
| Tensile Adhesion | 6200.0 | psi | ASTM D 4541 |
| Tensile Strength | 4850.0 | psi | ASTM D 638 |
| Tensile Elongation | 2.7 | % | ASTM D 638 |
| Flexural Modulus | 6.1 X 10E+5 | psi | ASTMD 790 |
| Hardness | 85.0 | Shore D | ASTMD 2240 (Durometer) |
| Vertical Sag Resistance (70°F, 0.25mm) | No Sag | — | — |
| Cathodic Disbondment | Passes | — | ASTM G 8 |
| Taber Wear (CS-17, 1000 Cycles, 1kg Load) | 60.0 | mg Loss | ASTM D 4060 |
| Maximum Temperature (Wet Service) | 125.0 | °F | — |
