Cactus Industrial PMMA-Based Top Coat / Sealer Coat
Cactus Industrial PMMA-Based Top Coat / Sealer Coat is a solvent-free, 2-component, fast curing and highly flexible methacrylate top coat sealer coating. A heavy duty, flexible top coat sealer. It’s suited to sealing the PMMA range of systems, providing steel deck protection, to sealing concrete floors and to encapsulate anti-skid / non-slip systems. The Top Coat can be used for creating patterns such as tile effects or lettering. Different finishings chips, sand, etc can be applied to achieve the desired slip-resistant properties and optional decorative chips are available.
Product families
- Primers & Sealers
- Top Coats
Other characteristics
- Features
Abrasion Resistant, Durable, Excellent Gloss Retention, Excellent Mechanical Strength, Fast Curing, Good Weather Stability, Highly Flexible, Skid Resistant, UV Resistant
- Product Type
2K (2 component) Coating, Sealer, Solventless & High Solids Coating, Top Coat; 2K (2 component) Coating; Sealer; Solventless & High Solids Coating; Top Coat
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Building & Construction
- Paints & Coatings
- Pot Life
At +20°C 100g, 2 % pbw. PMMA Catalyst; Approx. 15 minutes.; Applies only to two component products and refers to the time the mixture remains usable.
- PACKAGING
- 10kg container.
- Key Benefits
Fast-curing with a hardening time of just 40 minutes at 20°C and with a PMMA Catalyst dosage of 2% pbw. added to the Resin Base.; Good gloss retention.; High mechanical durability for internal and external applications on concrete and steel.; Excellent resistance to UV and weathering.; Good abrasion resistance.; This technology can be thixotroped when using on sloping surfaces or for vertical application.; Can be applied in low temperatures ranging from -10°C to 30°C.
- Technology
- Ready-to-Use Products
- Safety Advice
Avoid skin and eye contact i.e. wear gloves, goggles, etc.; Ensure good ventilation, mechanical if necessary.; Store and use away from heat and flame.; Do not eat or smoke in the vicinity of work.; Wash hands before eating.
- Application Areas
Flat and pitched roof areas; Balcony waterproofing; Car parking; Production areas; Offshore decks, lay down areas and walkways; Walkways; Warehouse; The fluid or thix grade is applied to our waterproofing coating for steel or concrete as a sealer.
- Application Methods
- Brush
- Roller
- Equipment Cleaning
If work is interrupted or when it is completed, clean the tools thoroughly with cleaning agent within the pot life of the material.; This can be done with a brush.; Do not use the tools again until the cleaning agent has evaporated fully.; Simply immersing the tools in the cleaning agent will not prevent the material from hardening.
- Practical Coverage
Practical coverage can vary considerably depending on method of application, surface roughness, weather conditions and complexity of the structure.
- Application Details
- For Mixing the Product
- Twin paddle mixer, steel container.
- Method of application
- Brush, roller.
- Thinner
- Do not thin.
- Cleaner
- PMMA cleaning agent 10 liter.
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume | 100.0 | % | — |
| Typical Thickness | min. 600 | microns | — |
| PMMA Catalyst by Weight | 2 - 6 | % | — |
| Viscosity (20°C) | 350 - 550 | mPa·s | DIN 53 019 |
| Flow Time (6mm Cup, 20°C) | 45 - 70 | seconds | DIN EN ISO 2431 |
| Density (D₄²⁰) | 1.2 | g/cm³ | DIN EN ISO 2811 |
| Flash Point | 10.0 | °C | DIN 51 755 |
