Cactus Industrial Cleankeep 5000 DW
- Chemical Family
- Epoxy & Epoxy Derivatives
Cactus Industrial Cleankeep 5000 DW is a solvent-free epoxy for us in drinking water tanks. It contains no solvent and minimizes the risk of solvent contamination. It is a solvent free epoxy coating.
Product families
Applications
- Concrete Coatings & Stains
- Pipes & Plumbing
Product Families
- Protective Coatings
Other characteristics
- Features
- Drinking Water Contact Acceptable, Solventless
- Product Type
- Epoxy Coating, Solventless & High Solids Coating
- Epoxy Coating
- Solventless & High Solids Coating
- Application Area
Pipes, Potable Water Applications, Tanks, Vacuum Pumps; Pipes; Potable Water Applications; Tanks; Vacuum Pumps
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal
- Markets
- Building & Construction
- Paints & Coatings
- Thinner
- Epoxy thinner A for cleaning only.
- PACKAGING
- Two Pack Product.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- Heavy Metal-free
- Overcoatability
- 10°C
- 1.5 hours
- 20°C
- 1 hour
- 30°C
- 45 min
- Recommended Use
- For fresh water tanks.
- May be used in other tanks and dry spaces.
- Application Data
Airless spray, brush, roller.; In case of brush or roller application more layers may be required to achieve the specified film thickness.; Add the hardener to the base whilst mixing.; Stir well before use.
- Airless Spray
- Tip No.
- Graco 619, 721
- Thinning
- No thinning required
- Application Methods
- Brush
- Roller
- Spray
- Surface Preparation
Best results are obtained on gritblasted steel to ISO-Sa 2.5.. For more specific instructions please consult our special CLEANKEEP 5000 surface preparation and application advice.
- Minimum Safety Precautions
Observe the precautionary notices displayed on the container.; Provide adequate ventilation.; Avoid skin contact and inhalation of spray mist.; If the product comes into contact with the skin, wash thoroughly with luke warm water and soap or suitable cleaner.; If the eyes are contaminated, irrigate with water and seek medical advice immediately.; Since the product contains flammable materials, keep away from sparks and open flames.; No smoking should be permitted in the area.
- Certifications and Compliance
- WRAS (UK)
- Preferable Preceding Coating
- CERABOND 2000
- EPICON ZINC HB-2 SH
- CLEANKEEP 5000 HOLDING PRIMER
- Ready to Use Product Features
- Drinking Water Contact Acceptable
- Solventless
- Compatible Substrates and Surfaces
- Concrete
- Metal
Technical data
Table 1 of 4
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point Mix | min. 100 | °C |
| Solids by Volume (Mix) | 100.0 | % |
Table 2 of 4
2 rows| Characteristic | Value |
|---|---|
| Mixture by Weight | 88.0 |
| Mixture by Volume | 81.0 |
Table 3 of 4
2 rows| Characteristic | Value |
|---|---|
| Mixture by Weight | 12.0 |
| Mixture by Volume | 19.0 |
Table 4 of 4
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Minimum Temperature | 10.0 | °C |
| Surface Temperature Dew Point | min. 3 | °C |
| Maximum Humidity | 85.0 | % R.H. |
| Paint Output Pressure | 23.5 - 33.4 | MPa |
| Film Thickness Wet | min. 300 | µm |
| Film Thickness Dry | min. 300 | µm |
| Spreading Rate (Theoretical) | 3.3 | m²/l |
