ARC® S4+
ARC® S4+ is 100% solids, advanced reinforced thin film coating to protect structures against extreme chemical attack and corrosion.
Product families
Applications
- Industrial Coatings
Product Families
- Protective Coatings
Other characteristics
- Brand
- ARC
- Features
Chemical Resistant, Excellent Substrate Adhesion, Good Adhesion, Good Mechanical Properties, Wear Resistant
- Product Type
- Solventless & High Solids Coating
- Application Area
- Fan Shaft, HVAC Ducts, Tanks
- Fan Shaft
- HVAC Ducts
- Tanks
- Application Method
- Brush, Roller, Spray
- Markets
- Paints & Coatings
- Coverage
- Nominal based on DFT 375 μm 15 mil.
- Typically applied as 2-Coat System.
- 1125 ml cartridge covers 3.00 m2 32.30 ft2
- 5 liter kit covers 13.33 m2 143.52 ft2
- 16 liter kit covers 42.70 m2 459.30 ft2
- PACKAGING
1125 ml; 5 liter; 16 liter; Each kit includes mixing and application instructions.; 5 liter kit includes tools.
- Shelf LIfe
2 years.; Unopened containers.; Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.
- Composition
Matrix:; A modified epoxy resin reacted with a modified cycloaliphatic amine curing agent; Reinforcement:; Proprietary blend of surface modified mineral reinforcements
- Designed to
Protect against extreme chemical attack in immersion.; Provide extended wear resistance.; Apply by brush, roller, airless or plural component spraying.
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Application Areas
- Exhaust gas ductwork
- Chemical storage tanks
- Heat exchangers
- Fans and housings
- Chimneys & stacks
- Tank linings
- Application Methods
- Brush
- Roller
- Spray
- Benefits and Features
Multi-functional chemistry Resists concentrated chemicals; Resists concentrated chemicals; High cross-link density Permeation resistant Improved thermal stability Enhanced mechanical properties; Permeation resistant; Improved thermal stability; Enhanced mechanical properties; Spark testable per NACE SP0188 Easy post application inspection Facilitates quality assurance; Easy post application inspection; Facilitates quality assurance; High adhesive strength No underfilm corrosion; No underfilm corrosion; 100% solids; no VOCs; no free isocyanates Enhances safe use; Enhances safe use
- Ready to Use Product Features
- Chemical Resistant
- Excellent Substrate Adhesion
- Good Adhesion
- Good Mechanical Properties
- Wear Resistant
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cured Density | 81.0 | lb/cu.ft. | — |
| Flexural Strength | 4000.0 | psi | ASTM D 790 |
| Pull-Off Adhesion | 4700.0 | psi | ASTM D 4541 |
| Tensile Strength | 3500.0 | psi | ASTM D 638 |
| Tensile Elongation | 7.0 | % | ASTM D 638 |
| Flexural Modulus | 2.5 X 10E+5 | psi | ASTMD 790 |
| Hardness | 83.0 | Shore D | ASTMD 2240 (Durometer) |
| Vertical Sag Resistance (70°F, 250µm) | No Sag | — | — |
| Maximum Temperature (Wet Service) | 140.0 | °F | — |
| Maximum Temperature (Dry Service) | 300.0 | °F | — |
| Maximum Temperature (Post Cure Wet Service) | 203.0 | °F | — |
