ARC® S1PW
ARC® S1PW is 100% solids, reinforced thin film coating to protect structures against chemical, erosion and corrosion attack. ARC S1PW is certified for cold water service requiring NSF 61 certification.
Product families
Applications
- Pipes & Plumbing
- Industrial Coatings
Product Families
- Protective Coatings
Other characteristics
- Brand
- ARC
- Features
Chemical Resistant, Corrosion Resistant, Excellent Dielectric Properties, Excellent Flow Properties, Good Barrier Properties, Good Erosion Resistance, Low Viscosity, Wear Resistant
- Product Type
- Solventless & High Solids Coating
- Application Area
- Pipe Fittings, Tanks, Vacuum Pumps, Valves
- Pipe Fittings
- Tanks
- Vacuum Pumps
- Valves
- Application Method
- Brush, Roller, Spray
- Markets
- Building & Construction
- Paints & Coatings
- Coverage
- Nominal based on DFT 375 μm 15 mil.
- Typically applied as 2-Coat System.
- 1125 ml cartridge covers 3.00 m2 32.30 ft2
- 5 liter kit covers 13.33 m2 143.52 ft2
- 16 liter kit covers 42.67 m2 459.26 ft2
- PACKAGING
1125 ml; 5 liter; 16 liter; Each kit includes mixing and application instructions.; 5 liter kit includes tools.
- Compliance
- Certified to NSF/ANSI 61.
- Shelf LIfe
1 year.; Unopened containers.; Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.
- Composition
Matrix:; A modified epoxy resin reacted with a modified cycloaliphatic amine curing agent.; Reinforcement (Proprietary):; Blend of fine aluminum oxide powders & micro glass flakes treated with polymeric coupling agent.
- Designed to
Provide excellent barrier protection against erosion, corrosion and chemical attack.; Meet all requirements of NSF 61 for potable, cold water service.; Easily apply by brush, roller or plural component spray.
- Technology
- Ready-to-Use Products
- Application Areas
- Crude oil storage tanks
- Chemical storage tanks
- Wastewater clarifiers
- Structural Steel
- Thickener tanks
- Cooling water systems
- Potable water pumps, valves and fittings
- Application Methods
- Brush
- Roller
- Spray
- Benefits and Features
Ceramic reinforced Resists erosion; Resists erosion; High dielectric resistivity Allows spark testing per NACE SP0188; Allows spark testing per NACE SP0188; Low viscosity Easy to apply; Easy to apply; Low surface energy Improves efficient flow; Improves efficient flow; Excellent adhesion No underfilm corrosion; No underfilm corrosion; Compliant to NSF 61 standard for cold water service Non-contaminating formulation; Non-contaminating formulation
- Certifications and Compliance
- NSF Standard 61 for Drinking Water
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Excellent Dielectric Properties
- Excellent Flow Properties
- Good Barrier Properties
- Good Erosion Resistance
- Low Viscosity
- Wear Resistant
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cured Density | 92.0 | lb/cu.ft. | — |
| Compressive Strength | 10180.0 | psi | ASTM D 695 |
| Flexural Strength | 9520.0 | psi | ASTM D 790 |
| Flexural Modulus | 5.4 X 10E+5 | psi | ASTMD 790 |
| Pull-Off Adhesion (Metal) | 6790.0 | psi | ASTM D 4541 |
| Tensile Elongation | 3.15 | % | ASTM D 638 |
| Hardness | 87.0 | Shore D | ASTMD 2240 (Durometer) |
| Vertical Sag Resistance (70°F, 250µm) | No Sag | — | — |
| Cathodic Disbondment | Passes | — | ASTM G 8 |
| Taber Wear (CS-17, 1000 Cycles, 1kg Load) | 60.0 | mg Loss | ASTM D 4060 |
| Maximum Temperature (Wet Service) | 75.0 | °F | NSF 61 |
| Maximum Temperature (Wet Service) | 126.0 | °F | — |
