Cactus Industrial PMMA-Based Self Levelling Mortar
Cactus Industrial PMMA-Based Self Leveling Mortar is a solvent-free, fast-reactive, flexibilised and filled self-smoothing mortar. It’s a 3-component methacrylate compound that delivers outstanding impact resistance, while its high elasticity ensures lasting crack-bridging. This is a versatile technology that can be used a hard wearing layer for waterproofing, thick-film layer and equalizing layer. It is a solvent-free, 3-component, fast-reactive, flexibilised and filled PMMA-based self-leveling mortar.
Product families
- Mortar & Grouts
Other characteristics
- Features
Chemical Resistant, Durable, Excellent Leveling Properties, Fast Curing, Flexible, Good Smoothness, High Elasticity, High Reactivity, Highly Versatile, Impact Resistance
- Product Type
- 3K (3 component) Mortar
- Application Area
- Walkway
- Application Method
- Trowel
- Markets
- Building & Construction
- Healthcare & Pharma
- Industrial
- Pot Life
At +20°C 100g, 2 % pbw PMMA Catalyst; Approx. 15 minutes.; Applies only to two component products and refers to the time the mixture remains usable.
- PACKAGING
10kg PMMA-Based Self-Leveling Resin and 20kg PMMA-Based Self-Leveling Mortar Filler.
- Key Benefits
Fast cure properties ensure the Self-Leveler is Hard Dry after 40 minutes at 20°C and PMMA Catalyst dosage of 1% pbw.; It's a versatile technology that can be used as a hard wearing layer for waterproofing, a thick-film layer and an equalizing layer.; Levels out damaged areas of up to 10mm height differences when used as an equalizing mortar.; Creates runoffs in unwanted water ponding areas.; It delivers outstanding impact resistance.; lts high elasticity ensures lasting crack bridging.; Can be applied in temperatures as low as 5°C up to 30°C.
- Technology
- Ready-to-Use Products
- Safety Advice
Avoid skin and eye contact i.e. wear gloves, goggles, etc.; Ensure good ventilation, mechanical if necessary.; Store and use away from heat and flame.; Do not eat or smoke in the vicinity of work.; Wash hands before eating.
- Labeling Claims
- Solvent-free
- Application Areas
- Walkways
- Lay Down Areas
- Decks
- Floor repairs
- Warehouses
- Machine Shops
- Workshops
- Chemical Plants
- Application Methods
- Trowel
- Equipment Cleaning
If work is interrupted or when it is completed, clean the tools thoroughly with cleaning agent within the pot life of the material.; This can be done with a brush.; Do not use the tools again until the cleaning agent has evaporated fully.; Simply immersing the tools in the cleaning agent will not prevent the material from hardening.
- Practical Coverage
Practical coverage can vary considerably depending on method of application, surface roughness, weather conditions and complexity of the structure.
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume | 100.0 | % | — |
| Typical Thickness | min. 4 | mm | — |
| PMMA Catalyst by Weight | 1 - 3 | % | — |
| Viscosity (20°C) | 1000.0 | mPa·s | DIN 53 015 |
| Flow Time (6mm Cup, 20°C) | 135 - 165 | seconds | ISO 2431 |
| Density (D₄²⁰) | 0.98 | g/cm³ | DIN 51 757 |
| Flash Point | 10.0 | °C | DIN 51 755 |
| Compressive Strength | 25.0 | N/mm² | DIN 1164 |
| Tensile Stress (Bending) | 15.0 | N/mm² | DIN 1164 |
| Specific Weight | 1.7 | g/cm³ | — |
