ARC® 855(E)
ARC® 855E is 100% solids, ceramic reinforced, thin-film coating to protect metal against chemicals, abrasion, and corrosion.
Product families
- Protective Coatings
Other characteristics
- Brand
- ARC
- Features
Abrasion Resistant, Chemical Resistant, Corrosion Resistant, Excellent Flow Properties, Excellent Substrate Adhesion, Good Adhesion, Good Erosion Resistance, High Gloss, High Performance, Low Shrinkage
- Product Type
- Solventless & High Solids Coating
- Application Area
- Tanks, Vacuum Pumps, Valves
- Tanks
- Vacuum Pumps
- Valves
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Ceramic, Plastics
- Markets
- Building & Construction
- Paints & Coatings
- Coverage
- ARC 855(E) requires a minimum of two coats.
- Nominal, based on a 750 µm (30 mil) thickness.
- 0.75 liter kit covers 0.98 m2 (10.60 ft2).
- 1.5 liter kit covers 2.00 m2 (21.53 ft2).
- 5 liter kit covers 6.67 m2 (71.76 ft2).
- 16 liter kit covers 21.33 m2 (229.63 ft2).
- PACKAGING
0.75 liter kit; 1.5 liter kit; 5 liter kit; 16 liter kit; Each kit includes mixing and application instructions. 0.75 liter, 1.5 liter & 5 liter kits include tools.; Components are pre-measured & pre-weighed.
- Shelf LIfe
2 years.; Unopened containers.; Stored between 10°C (50°F) and 32°C (90°F) in dry, covered facility.
- Designed to
Upgrade new and old equipment exposed to abrasion, corrosion or chemical attack.; Replace traditional coatings, special alloys, engineered plastics, ceramics, etc.; Easily apply by roller or brush.
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Application Areas
- Pump Casings
- Impellers and blades
- Heat Exchangers
- Bins and Silos
- Hoppers
- Waterboxes
- Transport Screws
- Tanks and Vessels
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cured Density | 112.0 | lb/cu.ft. | — |
| Compressive Strength | 13000.0 | psi | ASTM D 695 |
| Flexural Strength | 8200.0 | psi | ASTM D 790 |
| Pull-Off Adhesion | 5900.0 | psi | ASTM D 4541 |
| Tensile Strength | 4200.0 | psi | ASTM D 638 |
| Linear Coefficient of Thermal Expansion | 3.1 X 10E-5 | in/in/°F | ASTM C 531 |
| Composite Hardness | 88.0 | Shore D | ASTMD 2240 (Durometer) |
| Vertical Sag Resistance (70°F, 0.38mm) | No Sag | — | — |
| Maximum Temperature (Wet Service) | 149.0 | °F | — |
| Maximum Temperature (Dry Service) | 248.0 | °F | — |
