Cactus Industrial PMMA-Based Anti Slip Paint
Cactus Industrial PMMA-Based Anti Slip Paint is a solvent-free, 3-component heavy-duty anti-skid flooring system that’s designed for areas subject to extreme abrasion and wear. This specialist, durable flooring coating delivers excellent grip properties for indoor and outdoor use where a sure foothold is required. It’s suitable for all conditions, including wet environments. The system offers fine, medium and coarse aggregate for a suitable textured finish on steel, concrete and other substrates.
Product families
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Anti-Slip, Chemical Resistant, Durable, Fast Curing, Good Toughness, Good Weather Stability, High Reactivity, UV Resistant, Water Resistant, Wear Resistant
- Product Type
3K Coating, Coating, Solventless & High Solids Coating; 3K Coating; Coating; Solventless & High Solids Coating
- Application Area
- Walkway
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Building & Construction
- Pot Life
At +20°C 100g, 2 % pbw PMMA Catalyst; Approx. 15 minutes.; Applies only to two component products and refers to the time the mixture remains usable.
- PACKAGING
- 10kg container.
- Key Benefits
Fast-curing with a hardening time of just 40 minutes at 20°C and with a PMMA Catalyst dosage of 2% pbw. added to the Resin Base; A tough and durable coating with excellent grip properties.; Choices of fine, medium and coarse aggregate are available.; Suitable for internal and external application, including in wet environments.; Excellent resistance to UV and weathering.; Good chemical resistance.; Can be applied in temperatures as low as 0°C to 30°C.
- Technology
- Ready-to-Use Products
- Safety Advice
Avoid skin and eye contact i.e. wear gloves, goggles, etc.; Ensure good ventilation, mechanical if necessary.; Store and use away from heat and flame.; Do not eat or smoke in the vicinity of work.; Wash hands before eating.
- Application Areas
- Walkways
- Production Areas
- Warehouse
- Car Parking
- Offshore decks, lay down areas and walkways
- Balcony Waterproofing
- Application Methods
- Brush
- Roller
- Equipment Cleaning
If work is interrupted or when it is completed, clean the tools thoroughly with cleaning agent within the pot life of the material.; This can be done with a brush.; Do not use the tools again until the cleaning agent has evaporated fully.; Simply immersing the tools in the cleaning agent will not prevent the material from hardening.
- Practical Coverage
Practical coverage can vary considerably depending on method of application, surface roughness, weather conditions and complexity of the structure.
- Application Details
- For Mixing the Product
- Twin paddle mixer, steel container.
- Method of application
- Brush, roller. The aggregate is then evenly broadcast across the material upon application.
- Thinner
- Do not thin.
- Cleaner
- PMMA cleaning agent 10 liter.
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids by Volume | 100.0 | % | — |
| Typical Thickness | min. 600 | microns | — |
| PMMA Catalyst by Weight | 2 - 6 | % | — |
| Viscosity (20°C) | 350 - 550 | mPa·s | DIN 53 019 |
| Flow Time (6mm Cup, 20°C) | 45 - 70 | seconds | DIN EN ISO 2431 |
| Density (D₄²⁰) | 1.2 | g/cm³ | DIN EN ISO 2811 |
| Flash Point | 10.0 | °C | DIN 51 755 |
