Teldene® R40MLT
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Teldene® R40MLT is suitable for high clarity is used as injection molding and Injection-Stretch Blow Molding (ISBM) applications such as housewares and cosmetic packaging, food and non-food applications, CD cases and caps & closures and component parts for automotive industry.
Properties
- Physical Form
- Granules
- Solid
Product families
- Polyolefins
Other characteristics
- Brand
- Teldene
- Polymer Name
- Polypropylene Random Copolymer (RCP)
- Melt Flow Index
- 40.0 - 40.0 g/10 min
- Additives Included
- Anti-Static Agent, Nucleating Agent
- Anti-Static Agent
- Nucleating Agent
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Food Regulations
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document "Regulatory Compliances Product Declaration" upon request.
- Special Features
Amazing result on transparent articles; Shows broad processing window while providing excellent clarity at low molding temperature; Energy saving; Tested for biocompatibility, ISO 10993-4,5,10,11 (refer RCPD); Tested for VDA 270 compliance (refer RCPD)
- Material Features
- Biocompatible
- Broad Processing Window
- Dimensional Stability
- Excellent Transparency Properties
- Food Contact Acceptable
- Good Organoleptic Properties
- Low Energy Consumption
- Superior Clarity
- Key Characteristics
Organoleptically suitable for food contact; Nucleated random copolymer, contains anti-static agent; Excellent processability and fow-ability; Excellent transparency and dimensional stability; Good impact resistance; Potential for energy and cycle time saving; Reactor grade, no per-oxide added; Suitable for defined medical/pharma-packing applications, subject to NATPET approval; Food contact approval for specific applications (refer to NATPET)
- Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf lifeecommended at customer site is six months only as received.
- Typical Applications
Suitable for high clarity injection molding and Injection- Stretch Blow Molding (ISBM) applications. Used for the production of housewares and cosmetic packaging, TWIM articles for food and non-food applications, CD cases and caps & closures and component parts for automotive industry
- Processing Conditions
Average extruder temperature range may be kept between 190 - 270°C.
- Plastics and Elastomers End Uses
- Caps
- Closures
- Cosmetic Packaging
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density 23°C | 0.9 | g/cm³ | ISO 1183 |
| Melt Flow Rate (MFR) 230°C/2.16 kg | 40 | g/10-min | ASTM D 1238-13 |
| Flexural Modulus | 1100 | MPa | ISO 178 |
| Tensile Stress at Yield 50-mm/min | 29 | MPa | ISO 527 |
| Tensile Strain at Break 50-mm/min | min. 50 | % | ISO 527 |
| Tensile Strain at Yield 50-mm/min | 12 | % | ISO 527 |
| Heat Deflection Temperature 0.45 MPa Un-annealed | 73 | °C | ISO 75B |
| Vicat Softening Temperature A50 (50°C/h 10N) | 125 | °c | ISO 306 |
| Tensile Modulus 1-mm/min | 1000 | MPa | ISO 527 |
| Haze 1.0 mm | 6 | % | ASTM D 1003 |
| Izod Notched 23°C | 5.4 | KJ/㎡ | — |
