Teldene® B20ML
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Teldene® B20ML is used as injection molding for toys, furniture, sport goods, leisure goods, Housewares, TWIM food containers, medium to Large pails, photovoltaic panel and automotive compounding application.
Properties
- Physical Form
- Granules
- Solid
Product families
- Polyolefins
Other characteristics
- Brand
- Teldene
- Polymer Name
- Polypropylene Impact Copolymer (ICP)
- Melt Flow Index
- 21.0 - 21.0 g/10 min
- Additives Included
- Anti-Static Agent, Nucleating Agent
- Anti-Static Agent
- Nucleating Agent
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Food Regulations
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document "Regulatory Compliances Product Declaration" upon request.
- Special Features
Excellent Performance for TWIM application; Excellent dimensional stability; Excellent warpage control; Broad processing window, improved fluidity at optimized molding temperatures; Tested for VDA 270 compliance (refer RCPD)
- Material Features
- Broad Processing Window
- Dimensional Stability
- Food Contact Acceptable
- Good Balance of Properties
- Good Fluidity
- Good Impact Strength
- Good Stiffness
- High Impact Performance
- Key Characteristics
Nucleated Heterophasic copolymer; Contains anti-static agent; Excellent stiffness-impact balance with medium fluidity; Excellent isotropic shrinkage control; Food contact approval for specific applications (refer to NATPET).
- Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received.
- Typical Applications
Toys, furniture, sport goods, leisure goods, Housewares, TWIM food containers; Medium to Large paint pails; Photovoltaic panel and automotive compounding application
- Processing Conditions
Average extruder temperature range may be kept between 190 - 210°C.
- Plastics and Elastomers End Uses
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density 23°C | 0.905 | g/cm³ | ISO 1183 |
| Melt Flow Rate (MFR) 230°C/2.16 kg | 21 | g/10-min | ASTM D 1238-13 |
| Flexural Modulus | 1600 | MPa | ISO 178 |
| Tensile Stress at Yield 50-mm/min | 28 | MPa | ISO 527 |
| Tensile Strain at Break 50-mm/min | min. 50 | % | ISO 527 |
| Tensile Strain at Yield 50-mm/min | 5 | % | ISO 527 |
| Charpy un-notched 23 °C, Type 1, Edgewise | No Break | — | ISO.179 |
| Charpy un-notched 0°C, Type 1, Edgewise | 125 | KJ/㎡ | ISO 179 |
| -20°C, Typel, Edgewise | 100 | KJ/㎡ | ISO 179 |
| Charpy notched 23 °C, Type 1, Edgewise | 7.4 | KJ/㎡ | ISO 179 |
| Charpy notched 0°C, Type 1, Edgewise | 5.2 | KJ/㎡ | ISO.179 |
| -20°C, Type 1, Edgewise | 4 | KJ/㎡ | IS0.179 |
