Teldene® B07ML
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Teldene® B07ML is used as injection molding for products requiring a good resistance to long term heat exposure such as battery cases, automotive components and large containers and automotive compounding applications.
Properties
- Physical Form
- Granules
- Solid
Product families
- Polyolefins
Other characteristics
- Brand
- Teldene
- Polymer Name
- Polypropylene Impact Copolymer (ICP)
- Melt Flow Index
- 7.0 - 7.0 g/10 min
- Additives Included
- Heat Stabilizer
- Processing Methods
- Compounding, Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Food Regulations
This product is defined as a preparation under specific food contact regulation. Detailed information will be provided in a relevant document "Regulatory Compliances Product Declaration" upon request.
- Special Features
Amazing result on battery cases articles; Broad processing window, excellent flowability at optimized molding temperatures; Tested for VDA 270 compliance (refer RCPD)
- Material Features
- Broad Processing Window
- Dimensional Stability
- Food Contact Acceptable
- Good Balance of Properties
- Good Fluidity
- Good Impact Strength
- Good Stiffness
- Heat Aging Resistant
- Key Characteristics
Medium fluidity; Good balance of impact and stiffness; Low warpage tendency; Good heat aging resistance; Good dimensional stability; Formulated with a highly effective heat stabilization package; Food contact approval for specific applications (refer to NATPET)
- Storage and Handling
Polypropylene resin should be stored to prevent a direct exposure to sunlight and heat. The Product estimated shelf life is one year starting from production date, adequate humidity below 80%, and temperature below 40°C. Customers might not fully follow the optimal storage condition, hence the shelf life recommended at customer site is six months only as received.
- Typical Applications
Used for the production of injection molding products requiring a good resistance to long term heat exposure, especial y for battery cases, automotive components and large containers. Automotive compounding applications
- Processing Conditions
Average extruder temperature range may be kept between 190-210°C.
- Plastics and Elastomers End Uses
- Battery Cases
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Compounding
- Injection Molding
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density 23°C | 0.9 | g/cm³ | ISO 1183 |
| Melt Flow Rate (MFR) 230°C/2.16 kg | 7 | g/10-min | ASTM D 1238-13 |
| Flexural Modulus | 1100 | MPa | ISO 178 |
| Tensile Stress at Yield 50-mm/min | 27 | MPa | ISO 527 |
| Tensile Strain at Break 50-mm/min | min. 50 | % | ISO 527 |
| Tensile Strain at Yield 50-mm/min | 7 | % | ISO 527 |
| 23 °C, Type 1, Edgewise | No Break | — | ISO.179 |
| Charpy un-notched 0 °C, Type 1, Edgewise | 140 | KJ/㎡ | ISO.179 |
| -20 °C, Type1, Edgewise | 80 | KJ/㎡ | ISO 179 |
| 23°C, Type 1, Edgewise | 7.5 | KJ/㎡ | ISO 179 |
| Charpy notched 0 °C, Type 1, Edgewise | 4.5 | KJ/㎡ | ISO 179 |
| -20 °C, Type 1, Edgewise | 3.5 | KJ/㎡ | ISO. 179 |
