MICOROX® HTX SEALER

Product families

Other characteristics

Brand

MICOROX

Features

Abrasion Resistant, Chemical Resistant, Corrosion Resistant, Good Penetration

Product Type

2K (2 component) Coating, Epoxy Coating, Sealer, Solventless & High Solids Coating, Top Coat; 2K (2 component) Coating; Epoxy Coating; Sealer; Solventless & High Solids Coating; Top Coat

Application Method

Brush, Roller, Wipe

Compatible Substrates & Surfaces

Concrete

Cure

HTX SEALER is ready for foot traffic in 12 hours and ready for light wheeled traffic in 24 hours at 77°F. Complete cure may require 24 to 72 hours depending on temperature.; Cure Rate : Allow; 18 hrs for foot traffic; 24 hrs for light traffic

Markets

Building & Construction

PACKAGING

HTX SEALER is packaged in pre proportioned units based on gallon quantities.

Application

HTX SEALER is extremely easy to install and may be applied by contractors or plant personnel.; On concrete surfaces MICOROX® 103 makes an excellent primer. Apply the primer in a thin even film. Consult the primer data sheets for mixing instructions.; Mix HTX SEALER by combining one premeasured container of resin with one premeasured container of hardener. thoroughly with a drill-stirrer. components to disperse any settled fillers or pigments. approximately two minutes. No induction time is required. The material may be applied immediately.; Mix Premix Materials should be mixed for Apply the material by squeegee, roller or brush. Apply in a even 10-20 mils thickness. If a second coat is being applied, timing is important. Allow the first coat to cure for 12 hours. If the second coat cannot be applied within 48 hours., the surface must be sanded before recoating.

Show in full

Precaution

Contact with liquids Part A and B can cause irritation. Wear protective clothing. Cover hands with protective cream and/or gloves. Wear chemical splash goggles. Use only with adequate ventilation.

Availability

Available in Clear and 14 basic colors. Custom colors upon request.

Technology

Ready-to-Use Products

Application Methods

• Brush
• Roller
• Wipe

HIGHLIGHTS

MICOROX® HTX SEALER is a two component 100% solids epoxy sealer designed to offer outstanding chemical resistance.

Surface Preparation

When used as a topcoat for MICOROX® FLOORING SYSTEMS: Grind the surface with medium stones and vacuum to remove resulting dust.. When applied as a concrete coating: The surface to be coated must be sound and free of dirt, grease, oil, old coatings. Substrate must be exposed by acid etch or mechanical means.

Application Areas

Containment Areas, Floors, Trenches, Pits. Pump Pads, Sumps, Stock Chests, Wastewater Vessels, etc.

Temperature Limitations

During the installation and cure of HTX Sealer surface temperatures of 60° F- 90°F. are recommended.

Certifications and Compliance

USDA Certified

Ready to Use Product Features

• Abrasion Resistant
• Chemical Resistant
• Corrosion Resistant
• Good Penetration

Compatible Substrates and Surfaces

Concrete