MICORTHANE™ 9-82

Chemical Family: Polyurethanes (PU)

MICORTHANE™ 9-82 is a clear two component polyurethane c0ating that provides excellent chemical and abrasion resistance combined with superior wearability and color retention. Its rapid cure and property development make it an excellent choice for interior and exterior maintenance applications on concrete, metal or wood. MICORTHANE™ 9-82 is recommended as an architectural coating, a heavy-duty industrial maintenance coating, a coating for water treatment facilities and food processing facilities, as well as a host of other applications where corrosion and abrasion resistance and superior protection are important. U.S.D.A. approved for incidental food contact.

Product families

Ready-to-Use Products — Paints & Coatings

Other Paints & Coatings

Other characteristics

Brand: MICORTHANE
Features: Abrasion Resistant, Chemical Resistant, Cost Effective, Good Color Stability, Outdoor Durability, Rapid Curing Speed; Outstanding abrasion and corrosion resistance; Outstanding exterior durability; Ultraviolet ray protection; Fast cure time; U.S.D.A. approved for incidental food contact; Adheres to concrete, metal and wood
Product Type: 2K (2 component) Coating
Application Method: Brush, Roller
Compatible Substrates & Surfaces: Concrete, Metal, Wood
Markets: Industrial
Paints & Coatings
Precaution: MICORTHANE™ 9-82 is intended for industrial and commercial use only. Prolonged contact with skin can cause irritation. Wear protective clothing and chemical splash goggles to avoid eye contact. Wear a respirator rated for organic solvents wnen applying this product in poorly ventilated areas. Make sure that you have proper ventilation. Flammable!! Remove all sources of ignition before using.
Technology: Ready-to-Use Products
Application Methods: Brush
Roller
HIGHLIGHTS: MICORTHANE™ 9-82 is a cost effective, two component polyurethane used to provide excellent corrosion and abrasion resistance to concrete, metal and wood. Offers outstanding exterior durability. Recommended for use with skid resistant and textured surface flooring systems only.
Surface Preparation: Preparation is the most important part of any installation. Be sure that the surface to be coated is dry, clean, sound and free of grease, oil, old coatings, concrete curing compounds, dust and any other foreign material which may inhibit adhesion, by acid etching or mechanical means.
Temperature Limitations: During installation and cure the surface temperatures between 60°F - 90°F are recommended. The material should be at room temperature, as well. Lower temperatures will greatly increase the cure time.
Certifications and Compliance: USDA Certified

Technical data

Table 1 of 3

12 rows

Characteristic	Value	Unit
Flash Point (9-82 Resin)	116.0	°F
Weight per Gallon (9-82 Resin)	9.05	lbs.
N.V.W. (9-82 Resin)	48.4	%
N.V.V. (9-82 Resin)	41.1	%
Viscosity (9-82 Resin)	380.0	cps
V.O.C. (9-82 Resin)	560.0	g/l
Flash Point (9-82 Hardener)	91.0	°F
Weight per Gallon (9-82 Hardener)	8.54	lbs.
N.V.W. (9-82 Hardener)	51.5	%
N.V.V. (9-82 Hardener)	46.3	%
Viscosity (9-82 Hardener)	56.0	cps
V.O.C. (9-82 Hardener)	497.0	g/l

Table 2 of 3