ArmorPrime (726)
ArmorPrime (726) is a straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/ or a base coat. Due to the low viscosity of this product, it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates. ArmorPrime #726 has been designed for interior use only.
Product families
Applications
- Decorative Paints Coatings & Stains
- Fillers Levellers & Joints
Product Families
- Base Coats & Undercoats
- Primers & Sealers
Other characteristics
- Brand
- ArmorPrime
- Features
- Cost Effective, Low Odor, Low Viscosity
- Product Type
2K (2 component) Coating, Base Coat, Epoxy Coating, Primer, Solventless & High Solids Coating; 2K (2 component) Coating; Base Coat; Epoxy Coating; Primer; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- PACKAGING
- Kit sizes available are 1, 3, 15 gallons
- Advantages
Cost effective; Low viscosity promotes excellent adhesion to concrete substrates; Easy 2 to 1 mix ratio (by volume); Low odor during application & cure, can be applied in occupied facilities; VOC compliant with ALL U.S. regulations; Can be factory or field pigmented using ThermalChem's Universal Pigment
- Limitations
Must be applied in temperatures between 55 °F and 85 °F; Do not thin this product
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Avoid contact of uncured material to skin and eyes, proper PPE should be used during the handling of this product. Clean skin with soap and water. Tools and equipment should be cleaned with a solvent such as xylene or lacquer thinner. Refer to the Safety Data Sheet for additional information.
- Application Methods
- Brush
- Roller
- Wipe
- HIGHLIGHTS
General purpose, 100% solids epoxy primer available in straw and pigmented. This system can be applied neat in a thin mil coat or as thick as 20 mils, without a blush. It can be mixed with a fine silica to aid in filling rough and uneven concrete substrates prior to the final top coat application.
- Application
Apply #726 ArmorPrime with a squeegee, brush, or high quality non-shed roller. Only mix the amount of product that can be properly applied within 20-40 minutes.
- Surface Preparation
Apply #726 ArmorPrime only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
- Ready to Use Product Features
- Cost Effective
- Low Odor
- Low Viscosity
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids | 100.0 | % | — |
| VOC Content | 0.0 | g/L | — |
| Viscosity (Clear) | 300 - 500 | cps | — |
| Viscosity (Pigmented) | 700 - 950 | cps | — |
| Hardness | 78 - 80 | Shore D | ASTM D2240 |
| Dry to Touch (70°F) | 7 - 9 | hours | — |
| Recoat Time (after 24 hours lightly sand product, 70°F) | 7 - 23 | hours | — |
| Open for Light Traffic (70°F) | 24 | hours | — |
