DecoWear™ (745)
DecoWear™ (745) is a two (2) component 100% solids water clear polymer specifically formulated to be a base and intermediate coat for the DecoFlake and DecoQuartz decorative flooring systems. DecoWear™ is formulated with a cycloaliphatic curing agent and may be used as a clear topcoat where minimal UV discoloration can be tolerated.
Product families
- Top Coats
Other characteristics
- Brand
- DecoWear
- Features
Abrasion Resistant, Durable, Self-Priming, UV Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating, Top Coat, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating; Top Coat; Waterborne Coating
- Color
- Transparent
- Markets
- Building & Construction
- Advantages
Tough enough for foot or vehicular traffic; USDA approved and VOC compliant; Improved esthetic image in any environment; Camouflages many wear and scuff marks, common to most solid color coating surfaces; Good resistance to many common chemicals; Self-priming base coat; May be factory or field pigmented
- Limitations
Limited range of application temperatures; DecoWear™ minimum substrate application temperature - 55°F; Not recommended in areas of harsh chemical usage; DecoWear™ may discolor if exposed to sunlight or other UV sources; DecoWear™ may water spot if exposed to moisture prior to full cure; Allow to cure 7 days before chemical cleaning
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Warning : For professional use only. Avoid contact of uncured material with skin and eyes. Contact with skin may result in irritation. Wash skin with soap and water. If contact with eyes should occur, flush with water for 15 minutes and seek immediate medical attention.
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 76 - 82 | Shore D | ASTM D2240 |
| Bond Strength (100% con. failure) | max. 350 | — | ACI 503 |
| Impact Resistance | 160.0 | in./lbs | ASTM D2794 |
| Abrasion Resistance | 38 - 42 | mg. | ASTM D1044 |
| Tabor Abrasion (CS-17 Wheel 1000 gms. Load 1000 cycles) | loss | — | — |
| Viscosity (77°F) | 500 - 700 | cps | — |
| Viscosity (60°F) | 1500 - 1800 | cps | — |
| Compressive Strength (7 Day Cure Aggregate Filled) | 7800.0 | psi | ASTM D695 |
| Flexural Strength | 4500.0 | psi | — |
| Tensile Elongation | 5.8 | % | ASTM D638 |
| Tensile Strength | 8940.0 | — | — |
| Flammability | Self extinguishing over concrete | — | — |
