ArmorBond (730)
ArmorBond (730) is a two (2) component, 100% solids epoxy polymer Base Coat system for medium and general use applications where a normal cure formulation can be tolerated. Blended with select aggregates, this system can be trowel applied as an overlay system or applied as a slurry system with optional broadcast aggregate. 730 ArmorBond, when coated with one of the appropriate topcoats, provides very good impact, abrasion and chemical resistance characteristics.
Product families
- Base Coats & Undercoats
Other characteristics
- Brand
- ArmorBond
- Features
Abrasion Resistant, Chemical Resistant, Durable, General Purpose, High Impact Resistance, Self-Priming
- Product Type
2K (2 component) Coating, Base Coat, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Base Coat; Epoxy Coating; Solventless & High Solids Coating
- Application Method
- Trowel
- Markets
- Building & Construction
- Advantages
Good resistance to many common chemicals; Monolithic installation with integral cove base; Self-priming product (except troweled applications); Provides a highly durable and protective flooring system; Installed by approved applicators; No offensive odors during installation; USDA approved; Volume mix ratio: 2:1
- Limitations
Direct sunlight will cause some discoloration; Requires a protective top coat; Must be installed on dry surfaces only; Only available in normal cure; Limited substrate temperature range during installation; Not suitable in areas of harsh chemical use; Does not contain same pigment load as top coat systems
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Warning : For professional use only. Avoid contact of uncured material with skin and eyes. Contact with skin may result in irritation. Wash skin with soap and water. If contact with eyes should occur, flush with water for 15 minutes and seek immediate medical attention.
- Application Methods
- Trowel
- Color and Textures
Various slip-resistant textures available; May be field pigmented using Thermal- Chem's ColorThane universal pigment.; 730 ArmorBond is available in normal cure only.
- Certifications and Compliance
- USDA Certified
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 80 - 85 | Shore D | ASTM D2240 |
| Bond Strength (100% con. failure) | max. 350 | — | ACI 503 |
| Impact Resistance | 160.0 | in./lbs | ASTM D2794 |
| Abrasion Resistance | 33 - 35 | mg. | ASTM D1044 |
| Tabor Abrasion (CS-17 Wheel 1000 gms. Load 1000 cycles) | Loss | — | — |
| Viscosity (77°F) | 500 - 700 | cps | — |
| Viscosity (60°F) | 1300 - 1600 | cps | — |
| Compressive Strength | 10800.0 | — | ASTM D695 |
| PSI (7 Day Cure Aggregate Filled) | 12600.0 | — | — |
| Compressive Modulus | 277300.0 | — | ASTM D695 |
| Flexural Strength | 14370.0 | — | ASTM D790 |
| Modulus | 416000.0 | — | — |
