DecoTop Clear (748)
DecoTop Clear (748) is a two (2) component, 100% solids, low viscosity, water-clear epoxy that is specifically formulated to be a high-performance, intermediate, or topcoat for DecoFlake and DecoQuartz flooring systems. This proprietary formulation produces superior clarity, excellent resistance to ultraviolet (UV) light exposure, and higher gloss retention when compared to general-use epoxy products. DecoTop #748 is recommended for interior applications.
Product families
- Top Coats
Other characteristics
- Brand
- DecoTop
- Features
Chipping Resistance, Good Gloss Retention, High Gloss, High Performance, Low Viscosity, Odorless, Superior Clarity, UV Resistant, Wear Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating, Top Coat, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating; Top Coat; Waterborne Coating
- Color
- Transparent
- Markets
- Building & Construction
- PACKAGING
- Kit sizes are available are 1, 3, 15 gallons
- Advantages
Water-clear formulation; Excellent resistance to chipping/dings due to its; elongation properties; High gloss finish that is easy to maintain; Easy 2 to 1 mix ratio; 100% solids-no odor formulation; Superior clarity; Excellent wear durability
- Limitations
- Do not thin this product with any solvent
- Do not apply to a substrate below 55 Degrees F
- Limit exposure to harsh chemicals
- Technology
- Ready-to-Use Products
- Product Handling
Warning : For professional use only. Avoid contact of uncured material with skin and eyes. Contact with skin may result in irritation. Wash skin with soap and water. If contact with eyes should occur, flush with water for 15 minutes and seek immediate medical attention.
- Application
Typical Coverage will be between 80-160 square feet per gallon. This will vary depending on the surface to which the mixed product is applied.
- Ready to Use Product Features
- Chipping Resistance
- Good Gloss Retention
- High Gloss
- High Performance
- Low Viscosity
- Odorless
- Superior Clarity
- UV Resistant
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mix Ratio (Part A : Part B) | 1 : 1 | — | — |
| Solids Content | 100.0 | % | ASTM D-2697 |
| Viscosity (Mixed, 75°F) | 500 - 750 | cps | — |
| Abrasion Resistance (1000 cycles) | min. 50 | mg. loss | ASTM D1044 |
| Hardness | 75 - 79 | Shore D | ASTM D2240 |
| Application Temps | 55 - 80 | °F | — |
| Pot Life/Gel Time | 20 - 40 | minutes | — |
| Dry to Touch | 4 - 6 | hours | — |
| Foot Traffic | 8 - 10 | hours | — |
| Automotive Traffic | 24 | hours | — |
| Chemical Exposure | 7 | days | — |
