ArmorPrime 100 (734)
ArmorPrime 100 (734) is a straw colored 100% solids, two (2) component epoxy primer used over concrete substrates to promote adhesion and to seal old or new concrete to help prevent bubbles from occurring which are typically associated with concrete outgassing.
Product families
- Primers & Sealers
Other characteristics
- Brand
- ArmorPrime
- Features
Abrasion Resistant, Chemical Resistant, Fast Cure, Low Outgassing
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Advantages
- Available in colors
- Good resistance to most common chemicals
- Excellent adhesion to various substrates
- No offensive odors during application
- USDA approved product.
- Can be applied over moist or dry substrates
- Limitations
Colors are tinted - not fully pigmented; Limited substrate temperature range during application; Requires a protective topcoat of any; Thermal-Chem basecoat, resurfacer or topcoat; Not suitable in areas of harsh chemical attack
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Warning : For professional use only. Avoid contact of uncured material with skin and eyes. Contact with skin may result in irritation. Wash skin with soap and water. If contact with eyes should occur, flush with water for 15 minutes and seek immediate medical attention
- Certifications and Compliance
- USDA Certified
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 80 - 85 | Shore D | ASTM D2240 |
| Bond Strength (100% con. failure) | max. 350 | — | ACI 503 |
| Impact Resistance | 160.0 | in./lbs | ASTM D2794 |
| Abrasion Resistance | 35 - 44 | mg. | ASTM D1044 |
| Tabor Abrasion (CS-17 Wheel 1000 gms. Load 1000 cycles) | loss | — | — |
| Viscosity (77°F) | 600 - 800 | cps | — |
| Viscosity (60°F) | 1500 - 1800 | cps | — |
| Compressive Strength (7 Day Cure Aggregate Filled) | 10250.0 | psi | ASTM D695 |
| Compressive Modulus | 263300.0 | — | ASTM D695 |
| Flexural Strength | 13640.0 | — | ASTM D790 |
| Modulus | 389100.0 | — | — |
| Tensile Elongation | 5.4 | % | ASTM D638 |
