ArmorPrime WB (1080)
ArmorPrime WB (1080) is a two-component water-based epoxy that acts as a multi-functional primer or as a sealer. A great choice to seal older concrete surfaces to prevent out-gassing and air bubbles from transmitting through subsequent coatings. When applied in two or more coats, ArmorPrime-WB #1080 produces a very durable sealer coat. (For interior use only).
Product families
Applications
- Decorative Paints Coatings & Stains
Product Families
- Primers & Sealers
Other characteristics
- Brand
- ArmorPrime
- Features
Cost Effective, Durable, Fast Cure, Low Odor, Low Outgassing, Low Viscosity
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Sealer, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Sealer; Waterborne Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- PACKAGING
- Kit sizes available are 1, 3, 15 gallons
- Advantages
Cost-effective; Cures extremely fast to allow quicker return to service; VOC compliant with ALL U.S. regulations; Extremely low odor during application & cure - can be applied in occupied facilities; Very low viscosity provides deeper penetration into even the smallest voids in concrete; Can be applied to "Green" concrete
- Limitations
Do not apply in ambient temperatures below 50° F or above 80° F; Do not apply with relative humidity above 80%; Do not thin this product with any solvent; Do not tint this product
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Avoid contact of uncured material to skin and eyes, proper PPE should be used during the handling of this product. Clean skin with soap and water. Tools and equipment should be cleaned with a solvent such as xylene or lacquer thinner. Refer to the Safety Data Sheet for additional information.
- Application Methods
- Brush
- Roller
- Wipe
- Application
Apply ArmorPrime-WB #1080 with a squeegee, brush, or high-quality non-shed roller. Only mix the amount of product that can be properly applied within 20-35 minutes. Once thoroughly mixed this product should be placed on the surface and NOT LEFT IN THE MIXING BUCKET.
- Surface Preparation
Apply ArmorPrime-WB #1080 only to clean and sound substrates. Mechanical preparation by means of shotblasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
- Ready to Use Product Features
- Cost Effective
- Durable
- Fast Cure
- Low Odor
- Low Outgassing
- Low Viscosity
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids | 50.0 | % | — |
| VOC Content | 0.0 | g/L | — |
| Viscosity | 200 - 300 | cps | — |
| Hardness | 75 - 80 | Shore D | ASTM D2240 |
| Working Time (70°F) | 25 - 35 | minutes | — |
| Dry to Touch (70° F) | 1 - 3 | hours | — |
| Recoat Time (after 24 hours lightly sand product, 70°F) | 2 - 23 | hours | — |
| Open for Light Traffic (70°F) | 24 | hours | — |
