FlexGard M (739)
FlexGard M (739) is a unique 100% solids, two-component, low modulus flexible epoxy coating system. This self-leveling, flexible membrane produces elongation characteristics of 150% to 160% and remains flexible at temperatures between 0°F and 150°F. A resilient, durable, and tough flexible surface that is excellent for bridging non-working or nonmoving cracks up to 1/16" wide without additional preparation or the need to address each crack individually.
Product families
- Base Coats & Undercoats
Other characteristics
- Brand
- FlexGard
- Features
Durable, Flexible, Glossy Surface Aspects, Good Adhesion, Good Leveling Properties, Good Smoothness, Good Toughness, High Impact Resistance, Low Modulus, Resilient
- Product Type
2K (2 component) Coating, Base Coat, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Base Coat; Epoxy Coating; Solventless & High Solids Coating
- Application Method
- Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete, Metal, Wood
- Markets
- Building & Construction
- Advantages
Remains flexible in a variety of temperature ranges; Suitable for interior and exterior applications; Superior adhesion to a variety of substrates; No offensive odors during application; Bridges non-working or non-moving interior cracks or joints up to 1/16" wide; Installed by approved applicators; Volume mix ratio: 1:1
- Limitations
May require an appropriate Thermal-Chem primer on certain substrates; Substrate imperfections may show on the surface, a pre-fill coat may be required; Direct sunlight exposure will cause some slight discoloration; Structural repair methods for working cracks must be followed; Minimum application temperatures of 50° F; Requires an appropriate Thermal-Chem top coat/resurfacer; Do not broadcast of fill with sand; Available in straw and pewter gray; A variety of textures from a smooth, glossy finish to aggressive texture with appropriate Thermal-Chem top coat
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Warning : For professional use only. Avoid contact of uncured material with skin and eyes. Contact with skin may result in irritation. Wash skin with soap and water. If contact with eyes should occur, flush with water for 15 minutes and seek immediate medical attention.
- Application Methods
- Roller
- Wipe
