ArmorPrime Ultra-Fast (727)
ArmorPrime Ultra-Fast (727) is a straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/or a base coat. ARMORPRIME ULTRA-FAST has been specifically formulated to cure very rapidly. Due to the low viscosity of this product, it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates. ArmorPrime Ultra-Fast #727 has been designed for interior use only.
Product families
Applications
- Decorative Paints Coatings & Stains
Product Families
- Base Coats & Undercoats
- Primers & Sealers
Other characteristics
- Brand
- ArmorPrime
- Features
Cost Effective, Low Odor, Low Viscosity, Rapid Curing Speed
- Product Type
2K (2 component) Coating, Base Coat, Epoxy Coating, Primer, Solventless & High Solids Coating; 2K (2 component) Coating; Base Coat; Epoxy Coating; Primer; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- PACKAGING
- Kit sizes available are 1, 3, 15 gallons
- Advantages
Cost effective; Extremely rapid cure formulation; Low viscosity promotes excellent adhesion to concrete substrates; Easy 2 to 1 mix ratio (by volume); Ideal for fast-track patching; Low odor during application & cure-can be applied inoccupied facilities; VOC compliant with ALL U.S. regulations; Can be factory or field pigmented using Thermal-Chem's Universal Pigment
- Limitations
Can be applied in ambient temperatures as low as 40 °F (when applied in warmer temperatures this product will cure very quickly); Do not apply at less than 10 mils or 160 square feet per gallon; Do not thin this product
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Product Handling
Avoid contact of uncured material to skin and eyes, proper PPE should be used during the handling of this product. Clean skin with soap and water. Tools and equipment should be cleaned with a solvent such as xylene or lacquer thinner. Refer to the Safety Data Sheet for additional information
- Application Methods
- Brush
- Roller
- Wipe
- Application
Apply #727 ArmorPrime Ultra-Fast only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
- Surface Preparation
Apply #727 ArmorPrime Ultra-Fast only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
- Ready to Use Product Features
- Cost Effective
- Low Odor
- Low Viscosity
- Rapid Curing Speed
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids | 100.0 | % | — |
| VOC Content | 0.0 | g/L | — |
| Viscosity (Clear) | 300 - 500 | cps | — |
| Viscosity (Pigmented) | 700 - 950 | cps | — |
| Hardness | 78 - 80 | Shore D | ASTM D2240 |
| Working Time (70°F) | 10 - 15 | minutes | — |
| Dry to Touch (70°F) | 2 - 3 | hours | — |
| Dry to Touch (55°F) | 5 - 6 | hours | — |
| Recoat Time (after 24 hours lightly sand product, 70°F) | 2 - 23 | hours | — |
| Open for Light Traffic (70°F) | 24 | hours | — |
