RECKLI Epoxy GS
- Chemical Family
- Epoxy & Epoxy Derivatives
RECKLI Epoxy GS is a solvent-free two-component adhesive filler, based on epoxy resin, with excellent processing characteristics.
Product families
Applications
- Pipes & Plumbing
- Tooling & Moldmaking
Product Families
- Epoxies
Other characteristics
- Polymer Name
- Epoxy Resins & Compounds
- Flexural Strength
- 30.0 - 34.0 MPa
- Safety
Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.. This pamphlet replaces all previously published pamphlets concerning RECKLI Epoxy GS, stating them as no longer being valid.
- Markets
- Building & Construction
- Industrial
- Storage
Store in a dry place at room temperature. RECKLI Epoxy GS is storable for _x0012_6 months from delivery when kept in the closed original packaging at about _x001f_18°C. Opened drums must be closed airtight right after use.
- Processing
Before processing, the base component must be stirred up thoroughly. Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Once mixed, RECKLI Epoxy GS is trowelled to grain size over the entire surface; the processing of the material must be completed within the pot life (_x0014_25 – 30 minutes). Mixing larger quantities decreases the processing time.
- Consumption
500 - 1000 g/m² per application, depending on the surface's nature.
- Technology
- Plastics
- Labeling Claims
- Solvent-free
- Packaging Size
- Double drums
- _x0012_6 kg | 3 kg;
- Double cans
- 0.9_x0010_ kg;
- The hardener is enclosed in the lid.
- Fillers Included
- Glass Fiber
- Material Features
- Excellent Primer Properties
- Excellent Substrate Adhesion
- Good Processability
- Good Shrinkage Resistance
- Surface Preparation
The substrate must be stable, sound, dry, clean and free of oil, grease or wax. Concrete or other cement-based substrates should have a minimum age of 4_x001e_ weeks.
- Compatible Polymers and Resins
- Polystyrenes (PS)
- Plastics and Elastomers Functions
- Filler
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mixing ratio (base : hardener) | 5:1 | — | (according to weight) |
| Workable temperature | -20 | °C | — |
| Pot life (200-g mixture at +21°C) | 25 - 30 | minutes | — |
| Earliest loading (at +21°C): | 24 - 48 | hours | — |
| Full chemical and mechanical loading after: | 10 - 14 | days | — |
| Density | 1.25 | g/cm³ | — |
| Ball impression hardness | 55 - 60 | N/mm² | DIN 53456 |
| Compressive strength | 35 - 39 | N/mm² | DIN 53454 |
| Flexural strength | 30 - 34 | N/mm² | DIN 53452 |
