RECKLI Epoxy OH

Product families

Other characteristics

End Uses

Thin Coatings

Polymer Name

Epoxy Resins & Compounds

Safety

Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.. This pamphlet replaces all previously published pamphlets concerning RECKLI Epoxy OH, stating them as no longer being valid.

Show in full

Markets

Industrial

Storage

Store in a dry place at room temperature. RECKLI Epoxy OH is storable for _x0012_6 months from delivery when kept in the closed original packaging at about _x000f_ 18°C. Opened drums must be closed airtight right after use.

Processing

Before processing, the base component must be stirred up thoroughly. Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Thereby the incorporation of larger amounts of air should be avoided. Once mixed, the processing of the material must be completed within the pot life (_x0010_20 - 30 minutes). Mixing larger quantities decreases the processing time.; RECKLI Epoxy OH is preferably applied with a brush in several layers. Each coating can earliest be applied after the preceding layer is sufficiently cured (50 – 70 minutes, depending on the temperature). The best adhesion is achieved if the surface is still slightly wet but not displaceable anymore, however, after – _x0012_ hours at the latest. Alternatively, sprinkle oven-dry quartz or loose glass fibers on the still wet surface to ensure sufficient adhesion.; To facilitate the control of complete and adequate coverage, especially at edges and corners, add color paste (max. _x0010_2%) to every second layer.

Show in full

Cure

Heat Cure

Technology

Plastics

Labeling Claims

Solvent-free

Packaging Size

• Double drums: 8 kg | Double cans: 1_x000f_ kg;
• The hardener is enclosed in the lid.

Material Features

• Chemical Resistant
• Dimensional Stability
• High Impact Resistance
• Low Temperature Curing
• Thixotropic
• Wear Resistant

Surface Preparation

The substrate must be stable, sound, dry and clean. To ensure good adhesion, it must be free of oil, grease or wax. Vice versa, to enable an easy subsequent demoulding, the substrate must be sealed and covered with an appropriate releasing agent, if not self-releasing.

Plastics and Elastomers End Uses

Thin Coatings

Plastics and Elastomers Functions

Filler