RECKLI Epoxy BT
- Chemical Family
- Epoxy & Epoxy Derivatives
RECKLI Epoxy BT is a thixotropic pigmented epoxy resin coating.
Product families
Applications
- Pipes & Plumbing
- Tooling & Moldmaking
Product Families
- Epoxies
Other characteristics
- End Uses
- Thin Coatings
- Polymer Name
- Epoxy Resins & Compounds
- Safety
Protect skin and eyes from material splashes. Provide sufficient ventilation in the working place. Please consult the relevant safety data sheet and attend to the indications on the label of the package regarding the Dangerous Goods Regulation. This pamphlet is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. A preliminary test under operation conditions is highly recommended.. This pamphlet replaces all previously published pamphlets concerning RECKLI Epoxy BT, stating them as no longer being valid.
- Markets
- Building & Construction
- Industrial
- Storage
Store in a dry place at room temperature. RECKLI Epoxy BT is storable for 6_x0013_ months from delivery when kept in the closed original packaging at about 18°C. Opened drums must be closed airtight right after use.
- Processing
Before processing, the base component must be stirred up thoroughly. Add the hardener (B) to the base component (A) and mix them homogenously. Transfer the mixture into a second receptacle and stir it up again. Once mixed, the processing of the material must be completed within the pot life ( 35 – 40_x001e_ minutes). Mixing larger quantities decreases the processing time. RECKLI Epoxy BT is best applied with a brush or a roller.
- Properties
RECKLI Epoxy BT is a cold-curing two-component epoxy resin coating, solvent-free and slightly thixotropic. When cured, it shows good chemical and abrasion resistance. - .
- Consumption
- 300 - 500 g/m² per application.
- Cure
- Heat Cure
- Technology
- Plastics
- Labeling Claims
- Solvent-free
- Packaging Size
- double drums:5 kg | double cans:1 kg;
- The hardener is enclosed in the lid.
- Material Features
- Chemical Resistant
- Good Abrasion Resistance
- Low Temperature Curing
- Thixotropic
- Wear Resistant
- Surface Preparation
The substrate must be stable, sound, dry, clean and free of oil, grease or wax. Concrete or other cement-based substrates should have a minimum age of 4 weeks. A base coat with RECKLI Epoxy GS is recommended to ensure high adhesiveness and to fill defective spots and blowholes in the same working step. RECKLI Epoxy BT is best applied if the base coat is still slightly wet but not displaceable anymore, however, after _x001f__x001e_ hours at the latest
- Plastics and Elastomers End Uses
- Thin Coatings
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mixing ratio (base : hardener) | 4:1 | — | (according to weight) |
| Workable temperature | -20 | °C | — |
| Pot life (200-g mixture at +21°C) | 55 - 60 | minutes | — |
| Earliest demoulding (at +21°C): | 24 - 30 | hours | — |
| Full chemical and mechanical loading after: | 10 - 12 | days | — |
| Density | 1.32 | g/cm³ | — |
| Hardness | 74 | Shore D | DIN 53505 |
| Ball impression hardness | 120 | N/mm² | DIN 53456 |
| König pendulum hardness | 120 | s | DIN 53157 |
| Buchholz indentation resistance | 144 | — | DIN EN ISO 2815 |
| Erichsen impact resistance | min. 4 | Nm | ISO 6272 |
| Scratch resistance | min. 50 | N | ISO 1518 |
