MEI® 22-68 D.L.M. Adhesive
MEI® 22-68 D.L.M. Adhesive is a tacky water based adhesive designed for spray application and for use with duct liner machines. It is a safe, yet economical adhesive that offers premium performance. This adhesive will develop tack as it dries.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive, Waterborne Adhesive
- Contact Adhesive
- Waterborne Adhesive
- Application Method
- Roller, Spray
- Caution
- Use with adequate ventilation.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin.
- Do not take internally.
- In an emergency call a physician.
- Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
Wet - Clean, fresh water. Dry - Hot, soapy water or chlorinated solvent.
- Coverage
500 sq.ft/gal.; The coverage rate is dependent on the machine setting.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry. Apply the 22-68 to the sheet metal at a coverage rate of 500 sq. ft/gal. Press the insulation into place. Immediately install the mechanical fasteners.
- Limitations
- Keep from freezing
- Apply between 40ºF and 110º F.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Flammability
- Wet - Non-flammable
- Technology
- Ready-to-Use Products
- Application Methods
- Roller
- Spray
- Material Preparation
- Do not thin. Stir well
- Specification Compliance
Complies with LEED v4 ID&C, BD&C; Collaborative for High Performance Schools (CHPS) EQ 7.1.1; California Dept. of Public Health (CDPH) Standard Method v1.2; Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746); NFPA 90A& 90B; ASTM C916, Type I; Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
- Ready to Use Product Features
- Cost Effective
- Tacky
- Burning Characteristic
Applied to Inorganic Reinforced Cement Board; Tested as applied at a coverage rate of 100 sq. ft/gal.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Service Temperature | -20 to 180 | °F | — |
| Weight | 9.0 | lbs/gal | — |
| Non Volatile (Average) | 44.0 | % by Weight | — |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 15 | min | — |
| VOC (Less Water, Exempt Solvents) | max. 0.004 | lbs/gal | — |
| Viscosity | 1000 - 2000 | cps | #6 at 50RPM RVT |
