MEI® 22-07 Eco-Stuck Contact Cement
MEI® 22-07 Eco-Stuck Contact Cement is a fast-drying flammable contact cement. It is designed for spray or brush application and is suitable for bonding laps, adhering plastic foams, and laminating foam-backed vinyls and cloths to fiberglass or other materials.
Properties
- Physical Form
- Liquid
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications
- Construction Adhesives
Product Families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Cement Adhesive, Contact Adhesive
- Cement Adhesive
- Contact Adhesive
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Fiberglass, Fibers & Fabrics, Plastics
- Caution
Flammable mixture; Red Label; Do not use or store near heat, sparks or open flame.; Use with adequate ventilation.; Avoid prolonged or repeated breathing of vapor.; Avoid prolonged or repeated contact with skin.; Do not take internally. In an emergency, call a physician.; Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Building & Construction
- Clean Up
- Trichloroethylene or Xylol.
- Coverage
200 sq.ft./gal. of surface to be adhered. The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry before application. Using a brush or air atomizing spray equipment, apply 20-07 in a thin even coat to both surfaces. Before bonding, the contact cement should dry to touch. Press the surfaces together. The longer the joint is allowed to dry, the stronger the bond,. There is no repositioning. This is a contact cement.
- Limitations
Do not apply below 40°F or above 110°F. The solvent in 20-00 may attack some plastic foams. Test compatibility before using.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Asbestos-free
- VOC-free
- Application Methods
- Brush
- Spray
- Material Preparation
- Always stir 20-07 before using.
- Specification Compliance
- MIL-A-24179A Type II Class 1
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
- Ready to Use Product Features
- Fast Drying
- Burning Characteristic
Applied to Inorganic Reinforced Cement Board. Tested as applied at a coverage rate of 200 sq.ft./gal Flash point of finished adhesive (closed cup), less than -20°C.
- Compatible Substrates and Surfaces
- Fiberglass
- Fibers & Fabrics
- Plastics
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -20 to 220 | °F |
| Weight | 6.7 | lbs/gal |
| Non Volatile (Average) | approx. 20 | % by Weight |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 25 | min |
| VOC | 3.47 | lbs/gal |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (Wet, Flammable) | -4.0 | °F |
| Threshold Limit Value (Vapor) | 50.0 | ppm |
