MEI® 22-66 Mono-Tack S.E. Spray Adhesive
MEI® 22-66 Mono-Tack S.E. Spray Adhesive is a soft creamy white, water based spray adhesive that dries to a clear fire-resistive film. This adhesive is designed for fiberglass to fiberglass, fiberglass to metal applications, and edge coating duct liner. 22-66 develops very quick tack for a water based adhesive. It is ideally suited for sheet metal shops and assembly line operations where adhesive safety and performance are demanded.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive, Waterborne Adhesive
- Contact Adhesive
- Waterborne Adhesive
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Fiberglass, Metal
- Caution
- Use with adequate ventilation.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin
- In an emergency call a physician.
- Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
- Wet - Hot soapy water
- Dry - 44-10
- Coverage
400 sq.ft/gal.; The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry. 22-66 Mono-Tack S.E. Spray Adhesive can be spray applied with air atomizing spray equipment. Low ratio pumps with regulators for air and material can be used. Explosion proof equipment is not necessary. Pin welding may be done immediately. Apply a uniform coat of 22-66 to the insulation for fastest tack development. To bond press firmly in place. Contact Mon-Eco Industries, Inc. for detailed instructions.
- Limitations
- Keep from freezing.
- Apply between 50ºF and 110º F.
- Cold temperatures extend tack time.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Flammability
- Wet - Non-flammable
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Roller
- Spray
- Material Preparation
- Do not thin this product.
- Specification Compliance
Complies with LEED v4 ID&C, BD&C; Collaborative for High Performance Schools (CHPS) EQ 7.1.1; California Dept. of Public Health (CDPH) Standard Method v1.2; Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746); Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.; Low VOC Emitting Products per certificate number MAS-1400262, LEED v4, CHPS, CDPH Standard Method V1.1; NFPA 90A& 90B; ASTM C916 Type I; Passes edge burning resistance test.
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
- Ready to Use Product Features
- Fire-Resistant
- Burning Characteristic
Applied to Inorganic Reinforced Cement Board; Tested as applied at a coverage rate of 300 sq. ft/gal.
- Compatible Substrates and Surfaces
- Fiberglass
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -10 to 180 | °F |
| Weight | 9.5 | lbs/gal |
| Non Volatile (Average) | 61.7 | % by Weight |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 12 | min |
| VOC (Less Water, Exempt Solvents) | max. 1.15 | lbs/gal |
