MEI® 22-65 Mono-Tack Spray Adhesive
MEI® 22-65 Mono-Tack Spray Adhesive is a water based spray adhesive designed for fiberglass to metal applications. 22-65 Mono-Tack Spray Adhesive is ideally suited for sheet metal shops and production line operations because it is non-toxic, non-flammable, fire resistive and easy to use yet offers fast tack and high coverage rates for economy. It is a soft creamy paste when applied but dries to a clear film
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive, Waterborne Adhesive
- Contact Adhesive
- Waterborne Adhesive
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Fiberglass, Metal
- Caution
- Use with adequate ventilation.
- Avoid prolonged or repeated breathing of vapor.
- Avoid prolonged or repeated contact with skin.
- In an emergency call a physician.
- Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
- Water, 44-10, or Xylol
- Coverage
300 to 400 sq.ft/gal.; The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry. 22-65 Mono-Tack Spray Adhesive can be spray applied with air atomizing spray equipment. Low ratio pumps with regulators for air and material can be used. Explosion proof equipment is not necessary. Pin welding may be done immediately. Apply a uniform coat of 22-65 to the insulation for fastest tack development. To bond press firmly in place. Contact Mon-Eco Industries, Inc. for detailed instructions.
- Limitations
- Keep from freezing
- Apply between 50ºF and 110º F.
- Cold temperatures extend tack time.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Flammability
- Wet - Non-flammable
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- Material Preparation
- Do not thin this product.
- Specification Compliance
Complies with LEED v4 ID&C, BD&C; Collaborative for High Performance Schools (CHPS) EQ 7.1.1; California Dept. of Public Health (CDPH) Standard Method v1.2; Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746); Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.; Low VOC Emitting Products per certificate number MAS-1400262, LEED v4, CHPS, CDPH Standard Method V1.1; ASTM C916 Type I; NFPA 90A& 90B; Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
- Ready to Use Product Features
- Fire-Resistant
- High Coverage
- Non-Toxic
- Burning Characteristic
Applied to Inorganic Reinforced Cement Board; Tested as applied at a coverage rate of 300 sq. ft/gal.
- Compatible Substrates and Surfaces
- Fiberglass
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -40 to 195 | °F |
| Weight | 9.2 | lbs/gal |
| Non Volatile (Average) | 61.0 | % by Weight |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 12 | min |
| VOC (Less Water, Exempt Solvents) | max. 0.48 | lbs/gal |
