MEI® 20-00 Eco-Stuck Contact Cement Zero VOC
MEI® 20-00 Eco-Stuck Contact Cement Zero VOC is a flammable contact cement that has zero reportable volatile organic compounds (VOC). It is designed for spray or brush application and is suitable for bonding laps, adhering plastic foams, and laminating foam backed vinyls and cloths to fiberglass or other materials.
Properties
- Physical Form
- Liquid
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications
- Construction Adhesives
Product Families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Cement Adhesive, Contact Adhesive
- Cement Adhesive
- Contact Adhesive
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Fiberglass, Fibers & Fabrics, Plastics
- Caution
Flammable mixture; Red Label; Do not use or store near heat, sparks or open flame.; Use with adequate ventilation.; Avoid prolonged or repeated breathing of vapor.; Avoid prolonged or repeated contact with skin.; Do not take internally. In an emergency, call a physician.; Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Building & Construction
- Clean Up
- Trichloroethylene or Xylol.
- Coverage
200 sq.ft./gal. of surface to be adhered. The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry before application. Using a brush or air atomizing spray equipment, apply 20-00 in a thin even coat to both surfaces. Before bonding, the contact cement should dry to touch. Press the surfaces together. The longer the joint is allowed to dry, the stronger the bond,. There is no repositioning. This is a contact cement.
- Limitations
Do not apply below 40°F or above 110°F. The solvent in 20-00 may attack some plastic foams. Test compatibility before using.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Asbestos-free
- VOC-free
- Application Methods
- Brush
- Spray
- Material Preparation
- Always stir 20-00 before using.
- Specification Compliance
Complies with LEED v4 ID&C, BD&C; Collaborative for High Performance Schools (CHPS) EQ 7.1.1; California Dept. of Public Health (CDPH) Standard Method v1.2; Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746); Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.; Low VOC Emitting Products per certificate number MAS-1400262, LEED v4, CHPS, CDPH Standard Method V1.1
- Compatible Substrates and Surfaces
- Fiberglass
- Fibers & Fabrics
- Plastics
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -20 to 250 | °F |
| Non Volatile (Average) | approx. 26.5 | % by Weight |
| VOC | 0.0 | lbs/gal |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (Wet, Flammable) | -4.0 | °F |
| Threshold Limit Value (Vapor) | 750.0 | ppm |
