MEI® 22-30/22-31 Eco-Fab High Temp Adhesive
MEI® 22-30/22-31 Eco-Fab High Temp Adhesive is a sodium silicate based adhesive for adhering calcium, silicate insulation and other high temperature insulations to themselves or to non-porous substrates. Eco-Fab Hitemp Adhesive dries to a hard brittle film. It may be used for lagging asbestos cloth on very high temperature installations.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive
- Application Method
- Brush
- Caution
Sodium Silicate.; Skin and eye irritant.; Avoid contact with skin and eyes.; If contacted, flush with plenty of fresh clean water.; If ingested it will cause discomfort. Call a physician.; Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
- Fresh, clean water.
- Coverage
22-30 – 40 to 50 sq.ft./gal.; 22-31 – 25 to 30 sq.ft./gal.; The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only by trained and qualified craftspeople.; Do not thin.; 22-30 - Use clean paint brush and apply the adhesive evenly. Immediately press pieces, to be bonded, together.; 22-31 - Use a clean steel trowel and apply evenly at the recommended coverage. Immediately, firmly press the insulation in place.
- Limitations
This product is not recommended for use with fiberglass or mineral wool insulation.; The dry adhesive is soluble in water and should not be used where it is exposed to excessive moisture.; Keep from freezing.; Spot test compatibility with painted or primed surfaces.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Flammability
- Wet - Non-Flammable
- Dry - Incombustible
- Technology
- Ready-to-Use Products
- Labeling Claims
- Asbestos-free
- Application Methods
- Brush
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | 0 - 800 | °F |
| Weight (22-30) | 13.5 | lbs/gal |
| Weight (22-31) | 14.3 | lbs/gal |
| Non Volatile (Average, 22-30) | 56.0 | % by Weight |
| Non Volatile (Average, 22-31) | 61.0 | % by Weight |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 5 | min |
| VOC (22-30) | max. 0.42 | lbs/gal |
| VOC (22-31) | max. 0.37 | lbs/gal |
