MEI® 22-05 Eco-Tack Adhesive Low VOC
MEI® 22-05 Eco-Tack Adhesive Low VOC is a brush or roller applied flammable solvent based adhesive that features a reduced level of VOC. It is ideally designed for sheet metal and fabrication shops. It offers fast tack and high coverage for easy bonding of fiberglass duct wrap and duct liner to metal, plastics and foils.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive, Solventborne Adhesive
- Contact Adhesive
- Solventborne Adhesive
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Fiberglass, Fibers & Fabrics, Metal, Plastics
- Caution
Flammable mixture; Red Label; Do not use or store near heat, sparks or open flame.; Use with adequate ventilation.; Avoid prolonged or repeated breathing of vapor.; Avoid prolonged or repeated contact with skin.; Do not take internally. In an emergency, call a physician.; Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
- Xylol or mineral spirits
- Coverage
200 sq.ft./gal. of surface to be adhered. The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Be sure surfaces are clean and dry before application. When bonding Insulation to itself or sheet metal apply 22-05 Eco - Tack Low VOC Adhesive in a thin uniform coat to the entire surface. After application, press the insulation firmly in place. There is adequate open time for normal shop procedures.
- Limitations
Do not apply below 40ºF or above 110º F. Some plastic foams may be attacked by the solvent in - 22-05 Eco- Tack Low VOC Adhesive. Test compatibility before using.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Labeling Claims
- Asbestos-free
- Application Methods
- Brush
- Roller
- Material Preparation
- Do not thin this product.
- Specification Compliance
- ASTM C916 Type IV
- Certifications and Compliance
EC No.1907/2006; Occupational Safety & Health Administration (OSHA); Regulation (EU) No. 1272/2008
- Ready to Use Product Features
- Excellent Surface Tack
- High Coverage
- Low VOC
- Compatible Substrates and Surfaces
- Fiberglass
- Fibers & Fabrics
- Metal
- Plastics
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -40 to 180 | °F |
| Weight | 7.5 | lbs/gal |
| Non Volatile (Average) | 27.0 | % by Weight |
| Bonding Time (Depend on Temperature, Humidity, Film Thickness) | 0 - 20 | min |
| VOC | 1.39 | lbs/gal |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (Wet, Flammable) | 6.0 | °F |
| Threshold Limit Value (Vapor) | 200.0 | ppm |
