MEI® 22-09 Contact Adhesive
MEI® 22-09 Contact Adhesive is a water based adhesive that is milky white when wet, but dries to form a clear film. It has excellent adhesion to polystyrene foam, wood, fabrics and other materials. 22-09 Contact Adhesive is an excellent fabrication adhesive to use on polystyrene insulation.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MEI
- Product Type
- Contact Adhesive, Waterborne Adhesive
- Contact Adhesive
- Waterborne Adhesive
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Fibers & Fabrics, Wood
- Caution
Flammable mixture; Red Label; Do not use or store near heat, sparks or open flame.; Use with adequate ventilation.; Avoid prolonged or repeated breathing of vapor.; Avoid prolonged or repeated contact with skin.; Do not take internally. In an emergency, call a physician.; Keep out of reach of children.
- Feature
- Asbestos free
- Markets
- Adhesives & Sealants
- Clean Up
- Warm soapy water or Trichloroethylene.
- Coverage
200 sq.ft./gal. of surface to be adhered. The coverage rate is dependent on the surface being covered and the application method.
- Application
This product is for industrial use only. It should be applied by trained and qualified craftspeople. Use clean equipment. Spray equipment should be stainless steel construction. Apply adhesive in an even coat to both surfaces. Allow to dry before bonding. When dry, align the coated surfaces and press firmly together.
- Limitations
Urethane foam may be warped by water based material.; Test before using.; Keep from freezing.; Do not apply below 50ºF.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Bonding Time
The adhesive must be dry before bonding. The adhesive is dry when the color changes from white to clear. It usually takes one half hour, but this depends on ambient conditions. After drying you have a bond time of one (1) hour.
- Flammability
- Wet - Non-flammable. Water based
- Dry - Slow burning
- Technology
- Ready-to-Use Products
- Labeling Claims
- Asbestos-free
- Application Methods
- Brush
- Roller
- Spray
- Material Preparation
- Do not thin this product.
- Specification Compliance
Complies with LEED v4 ID&C, BD&C; Collaborative for High Performance Schools (CHPS) EQ 7.1.1; California Dept. of Public Health (CDPH) Standard Method v1.2; Criteria of MAS Certified Green® Program TVOC Emissions at 14 days, (Certificate Number MAS-1700746); Meets requirements for LEED® IEQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.
- Certifications and Compliance
- FDA 29 CFR 1910.1200
- WHMIS Ingredient Disclosure List (IDL)
- Ready to Use Product Features
- Excellent Substrate Adhesion
- Compatible Substrates and Surfaces
- Fibers & Fabrics
- Wood
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature | -10 to 325 | °F |
| Weight | 9.6 | lbs/gal |
| Non Volatile (Average) | 73.0 | % by Weight |
| VOC | 0.0 | lbs/gal |
