Ceramic industrial coating AquaTop 810 AOB810G20
Other characteristics
- Features
Chemical Resistant, Good Non-Yellowing Properties, Low Emissions, Pigmentable
- Product Type
2K (2 component) Coating, Top Coat, Waterborne Coating; 2K (2 component) Coating; Top Coat; Waterborne Coating
- Application Area
- Furniture
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Paper, Plastics, Polyesters, Wood
- N.B.
Mix well before use, the presence of a slight laying on the bottom is not a sign of deterioration, especially when the product has a few months of life, and it just needs to be carefully mixed to be used again.; Apply at temperatures above 15°C and maximum relative humidity of 65%.; All the coating products are sensitive to some particularly aggressive products used for surface cleaning (ammoniacal cleansers, solvents, sodium hypochlorite, ethyl alcohol, with high concentration, concentrated acids, detergents with abrasives,.. ) that could affect the integrity of finishings.; If applying on aluminum or plastic materials the support must be suitable prepared for coating (sanded, cleaned, etc.). Due to the variety of materials available it is always necessary to carry out preliminary tests of adhesion before beginning the work.; When coating aluminum, to improve adhesion of the paint to the support, we advise addition of 2% AD33 to the first component before adding the catalyst
- Color
- White
- Markets
- Consumer Goods
- Paints & Coatings
- Emissions
- A+ Very Low Emission
- Shelf LIfe
- 365.0 Days
- Gloss Notes
The given values refer to the product applied on a polyester base, in the recommended quantities and dried under standard conditions (23°C and 50% RH). The value of the gloss can slightly change depending on the applied quantity, the drying conditions and the substrate.
- Technology
- Ready-to-Use Products
- Main Features
Outstanding Covering; Outstanding Chemical resistance; Outstanding Resistance to the matting agent displacement
- Viscosity Notes
The quality control value of the viscosity refers to the product immediately after checking. Any variations of the data specified in the technical data sheet could be due to circumstances such as length and conditions of storage.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 46 - 50 | % |
| Gloss | 17 - 23 | — |
| Interval between Coats (23°C, 50% RH) | 1 - 4 | hour |
| Touch Dry (23°C 50% RH) | 1.5 | hour |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flow Cup Viscosity | 55 - 65 | Seconds | Ford cup 5 viscosity 20°C (sec) - MP04 |
| pH | 7.5 - 8.5 | — | pH (u.pH) - MP13 |
| Density | 0.18 - 1.28 | g/ml | MP01 |
| Fineness | 25 | Micron μ | Fineness(μm) - MP12 |
