Ceramic industrial coating AquaTop I WB8830XXx

Product families

Other characteristics

Features

Cleanable, Consistent High Quality, Fast Drying, Low VOC, Pigmentable; High build; Quality finish; Extremely Fast Stack Time; Water based, low VOC, HAPs compliant; Robust application properties; Fast Dry to touch an Sand; Easy water clean-up; Easily tinted using standard pigment dispersions

Product Type

• Top Coat, Waterborne Coating
• Top Coat
• Waterborne Coating

Application Area

Furniture

Application Method

Spray

Compatible Substrates & Surfaces

Wood

Note

*Values calculated from formula.

Markets

• Consumer Goods
• Paints & Coatings

Shelf LIfe

Shelf life ifunopened is 1 year (at 60-77F); never expose to freezing temperatures.

Technology

Ready-to-Use Products

Labeling Claims

• APEO-free
• HAPs-free
• Low VOC
• NMP-free

Benefits

The benefits of water-based opaque finishes; Infinite color possibilities with custom color matching expertise; Colors have excellent durability and stability – will not fade; Tinted primers available for dark colors; Safe, non-toxic and environmentally-friendly; GREENGUARD certifications; Non-flammable; Durability equivalents to traditional solvent products; Application-friendly and ideal processing times

Show in full

Application Methods

Spray

Application Procedure

Mixing; Mix thoroughly to ensure uniform consistency and color. Reducer; Deionized or distilled water Application; Spray applied using conventional equipment, airless, air-assisted or HVLP equipment.; Apply approximately 2-4 wet mils for 1-1.5 mil dry film thickness.; Surface Preparation; Wood must be clean, dry and finish sanded. Substrates should be free of grease, oil, dirt, fingerprints and any contamination to ensure optimum adhesion and coating performance properties. Moisture content of wood should be 6 to 8 %.; Sand first coat in order to eliminate grain raising and to improve the adhesion of the subsequent coat. 150 grit on open grain and 180 grit on closed grain wood. Always sand the sealer-coat within 8 hours prior to top-coating to improve adhesion.; Use Directions; For interior use only. Mix thoroughly before application. Stack only when the surface temperature is below 90F. Quicker stacking times are achievable relative to the amount of product that is applied. Drying Times; 15-20 minutes dry to touch / handle; 25-30 minutes dry to sand / recoat; 8 hours dry to pack; Tinting: Novocolor IP colorants up to 8% colorant by weight. Clean Up: Soap and water Recommended Primer : WB-8348 AquaSurf

Show in full

Ready to Use Product Features

• Cleanable
• Consistent High Quality
• Fast Drying
• Low VOC
• Pigmentable

Compatible Substrates and Surfaces

Wood