Ceramic industrial coating S-Matt AOX1018
Other characteristics
- Features
Chemical Resistant, Fast Drying, Low Emissions, Mar Resistant, Matte Finish, Non-reflective, Pigmentable, Self Healing, Soft Touch
- Product Type
2K (2 component) Coating, Coating, Top Coat, Waterborne Coating; 2K (2 component) Coating; Coating; Top Coat; Waterborne Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Wood
- N.B.
Mix well before use, the presence of a slight laying on the bottom is not a sign of deterioration, especially when the product has a few months of life, and it just needs to be carefully mixed to be used again.; Apply at temperatures above 15 ° C and maximum relative humidity of 65%.; All the coating products are sensitive to some particularly aggressive products used for cleaning. Some chemical aggressive uses of surface cleaning, if not properly used (ammoniacal detergents, solvents, sodium hypochlorite, high concentration ethyl alcohol, concentrated acids, abrasive detergents etc.) could affect the integrity of the finishes.; To avoid any inconvenience, the cleaning of painted surfaces must always be carried out with neutral detergents in aqueous solution.
- Color
- Transparent
- Markets
- Consumer Goods
- Paints & Coatings
- Emissions
- A+ Very Low Emission
- Shelf LIfe
- 365.0 Days
- Gloss Notes
The given values refer to the product applied on a polyester base coat, in the recommended quantities and dried in standard conditions (23°C and 50% R.H.). The gloss level might change depending on the applied quantity, the drying conditions and the coated surface.
- Technology
- Ready-to-Use Products
- Main Features
- Outstanding Mar resistance
- Outstanding Matt uniformity
- Good Chemical resistance
- Good Quickness of drying
- Viscosity Notes
The quality control value of the viscosity refers to the product immediately after checking. Any variations of the data specified in the technical data sheet could be due to circumstances such as length and conditions of storage.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 31 - 35 | % |
| Gloss | 0 - 4 | gloss |
| Interval between Coats (23°C, 50% RH) | 2 - 6 | hour |
| Touch Dry (23°C 50% RH) | 1.5 | hour |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flow Cup Viscosity | 45 - 65 | Seconds | DIN Cup 6 Viscosity - MP04 |
| pH | 7 - 8 | — | pH (u.pH) - MP13 |
| Density | 0.07 - 1.07 | g/ml | MP01 |
| Fineness | 20 | Micron μ | Fineness(μm) - MP12 |
