Ceramic industrial coating LCM Primer WB-8813C

Product families

Other characteristics

Features

Excellent Topcoat Hold-Out, Fast Drying, Low VOC; High build; Fast dry to sanding and packing; Good Hold Out with Topcoats; Water based, Low VOC; Versatile application – may be applied conventional, airless, air-assisted airless or HVLP spray

Product Type

• Primer, Waterborne Coating
• Primer
• Waterborne Coating

Application Method

Spray

Compatible Substrates & Surfaces

Wood

Note

*Values calculated from formula

Color

White

Markets

Paints & Coatings

Shelf LIfe

1 Year (60-77°F)

Technology

Ready-to-Use Products

Labeling Claims

Low VOC

Benefits

The benefits of water-based opaque finishes; Infinite color possibilities with custom color matching expertise; Colors have excellent durability and stability – will not fade; Tinted primers available for dark colors; Safe, non-toxic and environmentally-friendly; GREENGUARD certifications; Non-flammable; Durability equivalents to traditional solvent products; Application-friendly and ideal processing times

Show in full

Application Methods

Spray

Application Procedure

Mixing; Mix thoroughly to ensure uniform consistency before each use. Reducer; If needed: DI or distilled water, IM-078 Aqua Retarder to slow drying Application; Approx. 3-4 wet mils; 1-2 mil DFT Surface Preparation; Wood must be clean, dry and finish sanded. Substrates should be free of grease, oil, dirt, fingerprints and any contamination to ensure optimum adhesion and coating performance properties. Moisture content of wood should be 6 to 8 %.; Sand first coat in order to eliminate grain raising and to improve the adhesion of the subsequent coat. 150 grit on open grain and 180 grit on closed grain wood. Always sand the sealer-coat within 8 hours prior to top-coating to improve adhesion.; Use Directions; For Interior use only. Mix thoroughly before application. Stack only when the surface temperature is below 95°F. Quicker stacking times are achievable relative to the amount of product that is applied.; The following types of topcoats have been tested successfully over this primer: Latex, conversion varnish, pre-cat lacquer, solvent acrylic, 2k urethane. Always test performance of the complete coating system before beginning production.; Drying Times; 10-20 minute dry to sand; Clean Up: Soap and water Recommended Topcoat : WB-8829xx AquaTop

Show in full

Ready to Use Product Features

• Excellent Topcoat Hold-Out
• Fast Drying
• Low VOC

Compatible Substrates and Surfaces

Wood