HYDROPLUS™ AF7105000
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- HYDROPLUS
- Product Type
- Waterborne Coating
- Application Area
Cabinetry, Furniture; Interior wood products such as residential furniture, cabinetry, architectural woodworking.; Cabinetry; Furniture
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Wood
- Color
- Transparent
- Markets
- Consumer Goods
- Paints & Coatings
- Testing
The information, data, and recommendations set forth in this Product Data Sheet are based upon test results believed to be reliable. However, due to the wide variety of substrates, substrate properties, surface preparation methods, equipment and tools, application methods, and environments, the customer should test the complete system for adhesion, compatibility and performance prior to full scale application
- Catalyzing
For increased film hardness and chemical resistance, Hydroplus Waterborne Clear may be catalyzed at 1% by volume with a 50/50 blend of Waterborne (aziridine) Crosslinker XA4081 and deionized water. Stir the blend well. Additional catalyst volumes will not improve performance properties. When catalyzed, Hydroplus Waterborne Clear has a 24 hour pot-life. If no fresh material is added, you may catalyze the unused portion one time for an additional 24 hours of pot-life for one cycle only. Unused material must be disposed of after the second 24 hour period. To extend catalyzed material into the next day, it is recommended to add 50% of the Hydroplus Waterborne Clear. Catalyze the entire amount of material, not just the newly added material. Catalyzed material must not be carried over the weekend and should be properly disposed of.
- Shelf LIfe
18 months After long periods of storage, always check homogeneity and stir well before use to eliminate any possible sediment.
- Gloss Level
- 05, 20, 40, 60, 90 gloss
- Technology
- Ready-to-Use Products
- Use Method
Conventional, Airless, Air Assisted Airless, HVLP
- Mixing Procedure
Ready to use. If necessary, thin with deionized water.
- Application Methods
- Spray
Technical data
Table 1 of 1
19 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content (Weight Solids) | 27.4 - 29.4 | — |
| Solid Content (Volume Solids) | 24.3 - 26.3 | — |
| Specific Gravity | 1.04 | — |
| Viscosity (5,20,40,60 Gloss (Zahn #5 at 77°F)) | 17 - 22 | seconds |
| Viscosity (90 Gloss (Zahn #5 at 77°F)) | 14 - 20 | seconds |
| Recommended wet film thickness | 3.0 - 4.0 | mils |
| Recommended dry film thickness (per coat) | 0.75 - 1.0 | mils |
| Recommended total system dry film thickness | 4 | mils |
| Average Spread Rate (1.0 mils DFT, No loss) | 405 | ft²/gal |
| Drying time (77°F, Dust free) | 30 | minutes |
| Drying time (77°F, Touch Dry ) | 30 | minutes |
| Drying time (77°F, Sandable) | 30 - 45 | minutes |
