Ceramic industrial coating AquaLac 800 AO800G20
Other characteristics
- Features
Chemical Resistant, Good Non-Yellowing Properties, Low Emissions, Pigmentable
- Product Type
2K (2 component) Coating, Top Coat, Waterborne Coating; 2K (2 component) Coating; Top Coat; Waterborne Coating
- Application Area
- Furniture
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Paper, Plastics, Polyesters, Wood
- N.B.
Mix well before use, the presence of a slight laying on the bottom is not a sign of deterioration and it is sufficient to carefully mix it to use it.; Apply at temperatures above 15°C and maximum relative humidity of 65%.; All paint are sensitive to some particularly aggressive products used for cleaning surfaces (ammonia detergents, solvents, sodium hypochlorite, high concentration ethyl alcohol, concentrated acids, detergents with abrasives, etc.), which could compromise the integrity of the finishes. To avoid any kind of inconvenience, the painted surfaces must always be cleaned with aqueous detergents with a neutral pH.; In case of application on aluminum and plastic materials, the support must be adequately prepared for painting (sanding, washing, etc.). Given the variety of materials available on the market, it is necessary to carry out preliminary adhesion tests before starting work.; For aluminum, in order to improve the adhesion of the paint, it is recommended to also add the additive AD33 at 2% to the first component before the hardener.
- Color
- Transparent
- Markets
- Consumer Goods
- Paints & Coatings
- Emissions
- A+ Very Low Emission
- Shelf LIfe
- 365.0 Days
- Gloss Notes
The given values refer to the product applied on a polyester base, in the recommended quantities and dried under standard conditions (23°C and 50% RH). The value of the gloss can slightly change depending on the applied quantity, the drying conditions and the support used.
- Technology
- Ready-to-Use Products
- Main Features
Outstanding Chemical resistance; Good Resistance to the matting agent displacement
- Viscosity Notes
The quality control value of the viscosity refers to the product immediately after checking. Any variations of the data specified in the technical data sheet could be due to circumstances such as length and conditions of storage
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 31 - 35 | % |
| Gloss | 17 - 23 | gloss |
| Interval between Coats (23°C, 50% RH) | 1 - 4 | hour |
| Touch Dry (23°C 50% RH) | 1 | hour |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flow Cup Viscosity | 55 - 65 | Seconds | Ford cup 5 viscosity 20°C (sec) - MP04 |
| pH | 7.5 - 8.5 | — | pH (u.pH) - MP13 |
| Density | 0.08 - 1.08 | g/ml | MP01 |
| Fineness | 25 | Micron μ | Fineness(μm) - MP12 |
