Ceramic industrial coating AquaTop 510 AOB510G25
Product families
- Top Coats
Other characteristics
- Features
- Chemical Resistant, Low Emissions, Pigmentable
- Product Type
- Top Coat, Waterborne Coating
- Top Coat
- Waterborne Coating
- Application Area
- Furniture
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Paper, Wood
- N.B.
Mix well before use, the presence of a slight laying on the bottom is not a sign of deterioration and it is sufficient to carefully mix it to use it.; Apply at temperatures above 15°C and maximum relative humidity of 65%.; All paint are sensitive to some particularly aggressive products used for cleaning surfaces (ammonia detergents, solvents, sodium hypochlorite, high concentration ethyl alcohol, concentrated acids, detergents with abrasives, etc.), which could compromise the integrity of the finishes. To avoid any kind of inconvenience, the painted surfaces must always be cleaned with aqueous detergents with a neutral pH.
- Color
- White
- Markets
- Consumer Goods
- Paints & Coatings
- Emissions
- A+ Very Low Emission
- Shelf LIfe
- 365.0 Days
- Gloss Notes
The values are referred to the product applied on a polyester base, according to the suggested quantities, dryed at standard environment temperatures (23°C e 50% R.H.). The gloss value could slightly change according to the quantity applied, the drying process and the material to be coated.
- Technology
- Ready-to-Use Products
- Main Features
- Good Chemical resistance
- Good White covering
- Viscosity Notes
The quality control value of the viscosity refers to the product immediately after checking. Any variations of the data specified in the technical data sheet could be due to circumstances such as length and conditions of storage.
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 43 - 47 | % |
| Gloss | 22 - 28 | — |
| Interval between Coats (23°C, 50% RH) | 1 - 4 | hour |
| Touch Dry (23°C 50% RH) | 1 | hour |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flow Cup Viscosity | 90 - 110 | Seconds | DIN Cup 4 Viscosity - MP04 |
| pH | 7.2 - 8.2 | — | pH (u.pH) - MP13 |
| Density | 0.07 - 1.07 | g/ml | MP01 |
| Fineness | 25 | Micron μ | Fineness(μm) - MP12 |
