Flextille 600 P.M. Sanded Grout
600 P.M. Sanded Grout is a premium smooth spreading cement-based grout containing graded aggregates, colorfast pigments, and select polymer additives to provide superior flexural and compressive strengths. It cures to provide a dense, hard, wear resistant joint, containing FlexfreshTM for mold and mildew resistance
Other characteristics
- Features
Bondability, Excellent Stain Resistance, Excellent Strength, Improved Adhesion; Ultra strong.; For interior or exterior use.; Polymer additive provides color richness and uniformity.; Improved stain resistance.; Easy to use - just mix with water and apply.; Smooth, tight surface for easier maintenance.; With FlexfreshTM Revolutionary technology that helps to inhibit the growth of mildew, fungus and other bacteria causing odors and stains in construction materials.
- Product Type
- Grout
- Application Method
- Trowel
- Curing
Cure for a minimum of 24 to 48 hours prior to exposure to traffic, On exterior applications, where freshly grouted surfaces are exposed to traffi c or contamination from other trades, or where grouted surface is exposed to direct sunlight or other uneven drying conditions, cover with poly or plain, non-waxed craft paper for 72 hours to ensure proper cure. Protect from rain or water immersion until thoroughly dry. Sealing the grout is recommended but not mandatory. Follow the recommendations and instructions of the sealer manufacturer. To maintain a clean tile surface, use a neutral-pH cleaner for maintaining the fl oor, followed by a clean water rinse. Do not use harsh chemicals to maintain the tile surface. Grout must be cured for at least 21 days prior to regular maintenance and cleaning.
- Caution
Freshly mixed cement, mortar, concrete or grout may cause skin injury. Avoid extended contact with skin where possible and wash exposed skin areas immediately promptly with water. If any cement or cement mixtures get into the eye, rinse immediately and repeatedly with water and get prompt medical attention. Keep out of reach of children.
- Markets
- Building & Construction
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Limitations
Use only on surfaces which are maintained at a temperature above 10°C (50°F) and below 35°C (95°F) during application and for at least 72 hours after application.; Do not use Flextile 600 Premium Polymer-Modifi ed Sanded Grout on marble, or soft glazed wall tile, as scratching may occur. Some ceramic tile may be stained by colored grouts.; Do a test patch, or check with tile manufacturer to see if pre-sealing of tile is required.; Do not use for applications subject to heavy staining or chemical exposure use Flextile 1600UPG Ultra Performance Grout or Flextile FlexEpoxy 100 Epoxy Grout.
- Maintenance
No maintenance is required except where damages result from unforeseen circumstances.
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Cleanability | With water before material dries | — |
| Final Cure | 21.0 | Days |
| Initial Cure | 12 - 24 | Hours |
| Pot Life | 1.0 | Hours |
| VOCs | 0.0 | g/l |
