Flextille 5400 MaxiFlex Superior-Grade Polymer-Modified Mortar
5400 MaxiFlex Superior-Grade Polymer-Modified Mortar is a superior-grade, high-performance, one component, polymer-modified thin-set mortar. Unique, high polymer modification provides the superior bonding characteristics and exceptional flexibility required for installation of tile and stone over difficult to bond surfaces such as exterior grade plywood, vinyl and laminates, and is suitable for use with submerged applications and freeze/thaw conditions (see "Limitations" section).
Other characteristics
- Features
Bondability, Easy To Finish, Excellent Flexibility, Freeze/Thaw Stability, High Performance; High polymer content for high performance and flexibility.; Ideal for high traffic areas.; Can be used in both thin-set and medium-bed applications.; Can be used for submerged applications and freeze/thaw conditions (see "Limitations" section).; Excellent for most diffi cult tiles and substrates.; Excellent workability.; Available in Gray and White.; Rated as suitable for extra heavy service by ASTM C627-70 on concrete substrates.; Rated as a light performance commercial and residential mortar by ASTMC627-70 on plywood substrates.
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Color
- Grey
- White
- Caution
Freshly mixed cement, mortar, concrete or grout may cause skin injury. Avoid extended contact with skin where possible and wash exposed skin areas promptly with water. If any cement or cement mixtures get into the eye, rinse immediately and repeatedly with water and get prompt medical attention. Keep out of reach of children.
- Markets
- Building & Construction
- Basic Uses
Installation of ceramic, porcelain, mosaic, glass, quarry and paver tile.; Installation of most natural stone, marble, granite, slate and precast terrazzo tile.
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Limitations
Do not use over particleboard, Masonite, chipboard, OSB or similar unstable materials.; Do not use over cushioned resilient fl ooring, rubber, plastic, paint, asphalt, or plywood surfaces in wet areas.; Do not use directly over single layer plywood fl oors. Use only on surfaces, which are maintained at a temperature above 10°C (50°F) and below 35°C (95°F) during application and for at least 72 hours after application.; On exterior applications, protect from rain until thoroughly dried and protect from freezing for at least 14 days after installation.; When installing light-colored stones and translucent marble use Flextile MaxiFlex White.; Installations over nonporous surfaces may require extended setting/curing times.; Consult local building code requirements for use on exterior commercial facades.
- Maintenance
No maintenance is required except where damages result from unforeseen circumstances.
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Approx. Coverage (12 x 12 x 12 mm (1/2" x 1/2" x 1/2") - square-notch trowel) | 4.2 | m² |
| Approx. Coverage (19 x 14 x 10 mm ( 3/4" x 9/16" x 3/8") - round-notch trowel) | 3.8 | m² |
| Approx. Coverage (6 x 10 x 6 mm (1/4" x 3/8" x 1/4") - square-notch trowel) | 5.11 | m² |
| Approx. Coverage (6 x 6 x 6 mm (1/4" x 1/4" x 1/4") - square-notch trowel) | 7.1 | m² |
| Cleanability | With water before material dries | — |
| Final Cure | 28.0 | Days |
| Initial Cure | 24-48 | Hours |
| Open Time | 30.0 | Minutes |
| Pot Life | 2.0 | Hours |
| VOCs | 0.0 | g/l |
