Flextille 60 Polymer-Modified Thin-Set Mortar
60 Polymer-Modified Thin-Set Mortar is a one-component, polymer-modified thin-set mortar. Polymer modification provides the excellent bonding and flexibility characteristics required for installation of tile and stone over most surfaces.
Product families
- Ceiling Tiles
- Fillers Levellers & Joints
- Other Flooring & Surface Applications
- Wood Flooring
Other characteristics
- Features
Bondability, Easy To Finish, High Performance, Improved Adhesion, Water Resistant; Excellent adhesion to porcelain tile.; Excellent flexibility and bond strength.; Excellent workability.; Easy to use - just mix with water and apply.; Water resistant when cured.; Rated for residential and light commercial on plywood substrates.; Rated as suitable for heavy service by ASTM C627-70 on concrete substrates.
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Caution
Freshly mixed cement, mortar, concrete or grout may cause skin injury. Avoid extended contact with skin where possible and wash exposed skin areas promptly with water. If any cement or cement mixtures get into the eye, rinse immediately and repeatedly with water and get prompt medical attention. Keep out of reach of children.
- Markets
- Building & Construction
- Basic Uses
Installation of porcelain, ceramic, mosaic, quarry and paver tile.; Installation of natural stone, marble, granite, slate and precast terrazzo tile.
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Limitations
Installations over nonporous surfaces may require extended setting/curing times.; Do not use over particleboard, Masonite, chipboard, OSB or similar unstable materials.; Do not use over cushioned resilient fl ooring, rubber, plastic, paint, asphalt, or plywood surfaces in wet areas.; Do not use over single layer plywood fl oors. Use only on surfaces, which are maintained at a temperature above 10°C (50°F) and below 35°C (95°F) during application and for at least 72 hours after application.; Not recommended for water immersion.; Protect from excessive moisture until thoroughly dried and protect from freezing for at least 14 days after installation.; To use directly over gypsum-based patching or leveling substrates, applysuitable primer before use.; Do not use for moisture-sensitive stone such as green marble, certain limestone and granite, agglomerate tiles, cultured marble or resin-backed tiles. Instead, use Flexepoxy 100 mortar.; For installations subject to severe freeze/thaw conditions use Flextile two component systems.
- Maintenance
No maintenance is required except where damages result from unforeseen circumstances.
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Approx. Coverage (Per 22.7 Kg Bag, 10 mm (3/8") notched trowel) | 5.5 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 5 mm (3/16") notched trowel) | 10.0 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 6 mm (1/4") notched trowel) | 7.1 | m² |
| Cleanability | With water before material dries | — |
| Final Cure | 28.0 | Days |
| Initial Cure | 30 - 40 | Minutes |
| Open Time | 20 - 30 | Minutes |
| Pot Life | 2 - 3 | Hours |
| VOCs | 0.0 | g/l |
