Flextille 5100 Porcelain Bond Mortar
5100 Porcelain Bond Mortar is used for interior installation of porcelain tile, marble, slate, and all types of ceramic tile on vertical or horizontal surfaces of concrete, concrete block, masonry, brick and, in dry interior areas only, gypsum wallboard. For exterior installations or for installation of tile over exterior grade plywood surfaces (dry interior areas only), mix with Flextile 43 Thin-Set Mortar Additive or Flextile 44 High Solids Thin-Set Mortar Additive.
Product families
Applications
- Ceiling Tiles
- Fillers Levellers & Joints
- Other Flooring & Surface Applications
Product Families
- Mortar & Grouts
Other characteristics
- Features
Bondability, High Performance, Low Slip, Water Resistant; Good bonding of porcelain tile to interior concrete surfaces.; Good slip resistance on vertical applications.; High cement content.; Excellent workability.; Water resistant when cured.
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Caution
Freshly mixed cement, mortar, concrete or grout may cause skin injury. Avoid extended contact with skin where possible and wash exposed skin areas promptly with water. If any cement or cement mixtures get into the eye, rinse immediately and repeatedly with water and get prompt medical attention. Keep out of reach of children.
- Markets
- Building & Construction
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Limitations
Do not use over particleboard, masonite, chipboard, OSB or similar unstable materials. Do not use over resilient flooring, rubber, plastic, paint, asphalt, or plywood surfaces in wet areas. Do not use over single layer plywood floors. Use only on surfaces, which are maintained at a temperature above 10°C (50°F) and below 35°C (95°F) during application and for at least 72 hours after application. On exterior applications, protect from rain until thoroughly dried and protect from freezing for at least 14 days after installation.
- Maintenance
No maintenance is required except where damages result from unforeseen circumstances.
- Technology
- Ready-to-Use Products
- Packaging Type
- Bags
- Technical data
- Exceeds A118.1 specification requirements.
- Labeling Claims
- VOC-free
- Technical Service
Flextile maintains a well-equipped laboratory able to test its products in conjunction with the products with which they are used.
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Approx. Coverage (Per 22.7 Kg Bag, 10 mm (3/8") notched trowel) | 5.5 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 5 mm (3/16") notched trowel) | 10.0 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 6 mm (1/4") notched trowel) | 7.1 | m² |
| Cleanability | With water before material dries | — |
| Final Cure | 28.0 | Days |
| Initial Cure | 24-48 | Hours |
| Open Time | 20.0 | Minutes |
| Pot Life | 2.0 | Hours |
| VOCs | 0.0 | g/l |
