Flextille 51 Premium Floor and Wall
51 Premium Floor and Wall is a premium floor and wall thin-set mortar providing superior bond strength. Premium quality blend of Portland cement, mineral fillers and special additives provides sag resistance, ease of application, long open time and adjustability.
Other characteristics
- Features
Bondability, Easy To Finish, High Performance, Water Resistant; Finer texture for use with mosaic tile or another thin wall tile.; Good slip resistance on vertical applications.; High cement content.; Excellent workability.; Water resistant when cured.
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Caution
Freshly mixed cement, mortar, concrete or grout may cause skin injury. Avoid extended contact with skin where possible and wash exposed skin areas promptly with water. If any cement or cement mixtures get into the eye, rinse immediately and repeatedly with water and get prompt medical attention. Keep out of reach of children
- Markets
- Building & Construction
- Basic Uses
Installation of ceramic, mosaic, quarry and paver tile.; Installation of natural stone, marble, granite and precast terrazzo tile.; For installation of porcelain and glass tiles, gaged slate, polished back marble or granite tile mix with flextile 43 thin-set mortar additive or flextile 44 high solids thin-set mortar additive.
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Limitations
Do not use over particleboard, Masonite, chipboard, OSB or similar unstable materials.; Do not use over cushioned resilient fl ooring, rubber, plastic, paint, asphalt, or plywood surfaces in wet areas.; Do not use over single layer plywood fl oors. Use only on surfaces, which are maintained at a temperature above 10°C (50°F) and below 35°C (95°F) during application and for at least 72 hours after application.; For exterior applications, mix with Flextile 44 or Flextile 43 latex additives, protect from excessive moisture until thoroughly dried and protect from freezing for at least 14 days after installation.; To use directly over gypsum-based patching or leveling substrates, mix with Flextile 43 Thin-Set Mortar Additive or Flextile 44 High Solids Thin-Set Mortar Additive, also, apply suitable primer before use.; Do not use for moisture-sensitive stone such as green marble, certain limestone and granite, agglomerate tiles, cultured marble or resin-backed tiles.Instead, use Flexepoxy 100 mortar.
- Availability
Flextile 51 Premium Floor and Wall Thin-Set Mortar is available from Flextile Ltd. and its distributors in 22.7 kg (50 lb), and 11.3 kg (25 lb) bags.
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Approx. Coverage (Per 22.7 Kg Bag, 10 mm (3/8") notched trowel) | 5.5 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 5 mm (3/16") notched trowel) | 10.0 | m² |
| Approx. Coverage (Per 22.7 Kg Bag, 6 mm (1/4") notched trowel) | 7.1 | m² |
| Cleanability | With water before material dries | — |
| Final Cure | 28.0 | Days |
| Initial Cure | 24-48 | Hours |
| Open Time | 20.0 | Minutes |
| Pot Life | 2.0 | Hours |
| VOCs | 0.0 | g/l |
