Decoplast® Primer
Decoplast® Primer is used for priming prepared concrete, masonry, plaster, EIFS base coat, or drywall surfaces prior to application of Decoplast Finishes and Coatings.
Product families
- Primers & Lacquers
Other characteristics
- Brand
- Decoplast
- Features
Breathable, Good Adhesion, Good Color Stability, Low VOC, Non-Toxic, Water Resistant; Acrylic Based; Tinted for Finish; Substrate Absorption; Non Vapor Barrier; Water-Based; Low VOC
- Product Type
- Primer
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Markets
- Printing & Packaging
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Excellent adhesion; finish coat adhesion improvement.; Color uniformity improvement.; Improves coverage, water-resistance, and reduces possible efflorescence.; Allows substrate to breathe naturally.; Safe, non-toxic; cleans up with water.; Safe for workers and the environment.
- Coverage
800-1000 ft² (74.3-92.9 m²) per pail applied at 4 to 6 wet mils per coat.
- PACKAGING
- 5 gal pail (19L) 47.5 lbs / 21.6 kg per pail.
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Limitations
Use Decoplast Primer only when surface and ambient temperatures are above 40°F (4°C).; and below 100°F (38°C) during application and drying period.; Store Decoplast materials in a cool, dry place.; Sloped surfaces: Refer to Decoplast details.; Decoplast Primer should not be used on horizontal surfaces unless protected with appropriate Decoplast Finish materials.; Do not apply Decoplast Primer to frozen surfaces.
- Availability
- 64 Standard Colors / Custom Colors
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Method |
|---|---|---|
| Surface Burning (min. 450 Smoke Developed) | Pass | ASTM E-84 |
| Surface Burning (min.25 Flame Spread) | Pass | ASTM E-84 |
