Tique Metallic
- Chemical Family
- Acrylics & Acrylates
Tique Metallic is a 100% acrylic based exterior and interior coating. Tique Metallic finish may be used over approved substrates, properly prepared vertical concrete, stucco, EIFS, masonry, or previously acrylic coated smooth / textured surfaces.
Product families
- EIFS & Insulation
Other characteristics
- Brand
- Tique
- Features
Excellent Flexibility, Good Adhesion, Good Color Stability, Good Weather Stability, Low VOC, Non-Toxic; Acrylic Based; Non Vapor Barrier; Water-Based; Low VOC
- Product Type
- Waterborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Markets
- Building & Construction
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Excellent adhesion; internal flexibility; weather-resistant; color stability.; Allows substrate to breathe naturally.; Safe, non-toxic; cleans up with water.; Safe for workers and the environment.
- PACKAGING
- 1 gal pail (3.8L) 10.5 lbs / 4.76 kg
- 5 gal pail (19L) 52.5 lbs / 23.8 kg
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Method |
|---|---|---|
| Freeze/Thaw Resistance (60 Cycles) | Pass, No Deleterious Effects | ASTM E 2485 |
| Mold Resistance | No Mold Growth | ASTM D-3273 |
| Visible Color Change (2000 hours) | Pass, No Deleterious Effects | ASTM G 154 |
| Water Vapor Permeability (ICC Vapor Permeablity) | Pass | ASTM E-96 |
