Decoplast® Exterior Top Coat
- Chemical Family
- Acrylics & Acrylates
Decoplast® Exterior Top Coat is 100% acrylic-based interior and exterior wall coating used over prepared concrete, masonry, plaster/stucco and acrylic textured coatings.
Other characteristics
- Brand
- Decoplast
- Features
Breathable, Good Adhesion, Good Color Stability, Low VOC, Non-Toxic, UV Resistant; Pure acrylic; Vapor permeable; Water-based; UV Resistant; Low VOC
- Product Type
Solventless & High Solids Coating, Top Coat, Waterborne Coating; Solventless & High Solids Coating; Top Coat; Waterborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
- Excellent adhesion.
- Allows substrate to breathe naturally.
- Safe, non-toxic; cleans up with water.
- Excellent color retention.
- Safe for workers and the environment.
- Coverage
590-690 ft² (49-58 m²) per pail for a single coat, applied at 12-14 mils (0.3 to 0.36 mm), wet to achieve 8.4-10.8 mils DFT per coat.. 295-345 ft² (25-29 m²) per pail for two coats, applied at 12-14 mils (0.3 to 0.36 mm) per coat, wet to achieve 8.4-10.8 mils DFT per coat.
- PACKAGING
- 5 gal pail (19L) 52.5 lbs / 23.8 kg per pail.
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Limitations
Use Decoplast Exterior Top Coat only when surface and ambient temperatures are above 40°F (4°C) and below 100°F (38°C) during application and drying period.; Store Decoplast materials in a cool, dry place.; Sloped surfaces: Refer to Decoplast details.; Decoplast Exterior Top Coat should not be used on weather-exposed horizontal or below grade surfaces or where immersion in water may occur.; Do not apply Decoplast Exterior Top Coat to frozen surfaces.; Do not overcoat with solvent-based materials.
- Availability
- 64 Standard Colors / Custom Colors.
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (Concrete) | 420.0 | psi | ASTM D-4541 |
| Flexibility, Mandrel Bend, Elongation (70°F, No Crack) | min. 32 | % | ASTM D-522 |
| Tensile Strength | 310 psi | — | ASTM D-412 |
| Water Vapor Permeability (ICC Vapor Permeability) | Pass | — | ASTM E-96 |
