Tique Aquaguard
Tique Aqua Guard is a one component, fluid-applied vapor permeable air/ water-resistive barrier. It is applied directly to vertical, above-grade approved wall substrates and provides an excellent waterproof air barrier when combined with Tique Wall Systems joint and rough opening treatment.
Other characteristics
- Brand
- Tique
- Features
- High Gas Permeability, Low VOC, Non-Toxic
- Waterproof
- Vapor Permeable
- Structural with wind
- Resists UV Degradation/ Added Durability
- Low VOC formulation
- Product Type
- 1K (1 component) Coating
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry, Wood
- Markets
- Building & Construction
- Storage
Store Aqua Guard in a cool, dry place protected from freezing. Store at no less than 4°C (40°F). Protect from extreme heat and direct sunlight.
- Benefits
Possible water damage minimized with repair and restoration costs associated; Condensation risk in wall minimized from water vapor diffusion; No air leakage between sheathing and Tique Wall Systems WRB; rigid/stable under air pressure loads; does not tear or blow off the wall; 180 day exposure rating during construction.; Safe, non-toxic; VOC compliant
- PACKAGING
- 5 gallon (19L) 52.5 lbs / 23.8 kg per pail
- Compliance
This product complies with US EPA, South Coast AQMD and Greenseal Standard VOC emission standards for architectural coatings.
Technical data
Table 1 of 1
19 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Air Leakage | 0.02 | L/Min./m² | ASTM E283 |
| Air Permeance (75Pa) | max. 0.02 | L/s/m² | ASTM E2178-11 |
| Flame Propogation | Pass; UL Certified | — | NFPA-285 |
| Puncture Resistance | 31.5 | lbs | Lab Test |
| Racking (No cracking, Net Deflection 1/8") | Pass | — | ASTM E72 |
| Radiant Heat lgnition (No Flame Spread/Ignition) | Pass | — | NFPA-268 |
| Solids (By Volume, Calculated) | 65.0 | % | — |
| Structural Performance (10 Cycles) | Pass | — | ASTM E1233 Proc A |
| Tensile Bond | Pass | — | ASTM C-297 |
| Tensile Bond | Pass | — | ASTM E2134 |
| Tensile Bond (Liquid Weather Barrier Flashing, min 15 psi) | min. 70 | psi | ASTM C297/297M-04(2010) |
| Tensile Bond (Substrate, min 15 psi) | min. 20 | psi | ASTM E2568-09e1 |
